Portable dissolved oxygen meters provide a fast, efficient way to implement at-line monitoring at various points in your operation. METTLER TOLEDO's InTap portable dissolved oxygen analyzer is a lightweight tool for monitoring dissolved oxygen at ppb levels. This portable DO analyzer uses optical oxygen measurement technology to get an accurate reading with minimal maintenance required.
InTap is a portable dissolved oxygen meter specially designed for brewing applications. This video highlights how the portable DO analyzer InTap works and how it can be used to help monitor and control CO2 purging of bright beer tanks.
Accurate testing of DO in critical process steps is easily achieved with the InTap portable dissolved oxygen meter, which uses optical fluorescence quenching technology.
The InTap portable DO analyzer serves as a convenient calibration instrument for in-line DO sensors. It facilitates measurement and calibration procedures in both process and laboratory settings.
Measurement point tracking in the InTap portable dissolved oxygen meter allows operators to easily tie stored measurement data to up to 99 different measurement points in production.
The InTap portable DO meter measures accurately down to 2 ppb. These low values are optimal for helping to avoid out-of-spec product at filling and production lines.
For easy portability throughout your production site, this portable DO meter weighs just 3.2kg (7lbs) and is compact and easy to carry from location to location.
This portable DO meter makes it easy to maintain records point-by-point for traceability and documentation purposes. The InTap has the ability to save this data directly on a USB drive.
During calibration, the InTap takes a measurement and communicates it directly to the transmitter of your Bluetooth-enabled, in-line, optical sensor, eliminating any possibility of mistakes.
This white paper examines the benefits of measuring dissolved oxygen with METTLER TOLEDO's new InTap DO meter for brewing. InTap is an at-line portable DO meter that uses optical measurement technology and is an ideal tool for dissolved oxygen monitoring. It can be used for spot check measurements at tanks and as a temporary in-line measurement unit in filtration, blending, and filling lines. Lees meer
This white paper explains a how the calibration of in-line dissolved oxygen sensors can be simplified and manual errors can be reduced using an In-Tap portable dissolved oxygen meter. Lees meer
This case study describes how purging bright beer tanks with carbon dioxide is an important step in keeping oxygen out of beer, but using a time-based method for purging can waste CO₂. For a US craft brewer, the convenient, portable InTap oxygen meter provides real-time data on purging and has reduced CO₂ use. Lees meer
This guide details how to optimize brewing by using five critical measurements within the beer production process. Lees meer
The InTap™ portable oDO analyzer must only be connected, commissioned, and maintained by qualified specialists in full compliance with the instructions in this User Manual, the applicable norms and legal regulations. Lees meer
The Process Analytics Catalog provides a comprehensive overview of solutions for analytical measurements in liquid process applications, pure water monitoring and gas-phase measurement. Parameters covered include pH, dissolved oxygen, dissolved CO2, conductivity, turbidity, and total organic carbon. Lees meer
We support and service your measurement equipment through its entire life-cycle, from installation to preventive maintenance and calibration to equipment repair.
A portable dissolved oxygen meter is an instrument for at-line monitoring of dissolved oxygen in an industrial process. They are commonly used to do testing of DO concentration in a process at locations where a continuous, in-line DO sensor is not required or possible. They can also be used at sampling points near an in-line DO sensor to verify that the sensor is correct, and to calibrate the in-line sensor. METTLER TOLEDO's primary portable dissolved oxygen meter is the InTap portable optical dissolved oxygen analyzer.
The InTap portable dissolved oxygen meter uses a special optical dissolved oxygen sensor designed for brewing applications. It is based on the same technology that is in METTLER TOLEDO's InPro 6970i low-ppb optical dissolved oxygen sensor for breweries.
The InTap portable dissolved oxygen meter weighs 3.2kg, or 7lbs, making it easy to move around your brewery or production site.
The InTap portable dissolved oxygen meter is designed specifically to deal with the challenges of calibrating in-line DO sensors and reduces calibration workload by as much as 50%. The portable DO meter can be used at a sampling point near an in-line sensor, and uses Bluetooth communication to write the calibration information directly to any in-line DO sensor equipped with a T100 Bluetooth adapter, quickly and without any manual input. This reduces both time and potential for error during calibration.
The InTap has 8GB of digital storage and can store data for up to 99 measurement points. The data are recorded by the InTap portable dissolved oxygen meter and can be saved on a USB drive for further documentation and analysis.
