OptiMax Starter Kit and HFCal
Št. Izdelka: 511628301
Specifikacije
Specifikacije - OptiMax Starter Kit and HFCal
| Teža | 35 kg |
| Delovna prostornina | 150 mL – 1 000 mL |
| Mere (VxŠxG) | 78 cm x 39 cm x 42 cm |
| Temperaturni razpon | -40 °C – 180 °C |
| Zadnja/sprednja luč | Yes/Yes |
| Natančen prenos toplote | Typically +/- 3% |
| Natančnost in točnost za posamezno toploto | Typically +/-10% |
| Natančnost pretoka toplote | Based on comparison of qr_hf with qc resp. ∫qr_hf with ∫ qc Isothermal conditions: ± 3 % to 5 % Non-isothermal conditions: ± 5 % to 10% |
| Vrsta kalorimetrije | Heat Flow |
| Material | OptiMax Starter Kit (51162830) and Upgrade Kit OptiMax HFCal (30050150) |
| Temperaturni načini | Jacket control, reaction mixture control, distillation control, crystallization control |
| Gretje/hlajenje | Solid State Thermostat |
| Zahteve za napajanje | 100 – 240 VAC, 50/60Hz |
Dokumentacija
Preglednica
Datasheets for EasyMax and OptiMax HFCal models include technical specifications and configuration options.
Brošure o izdelkih
View the full catalog of chemical synthesis reactors, workstations, and accessories. Find what you need for your lab!
Podrobnejše informacije o izdelkih
Guide on how to operate your OptiMax chemical synthesis workstation.
METTLER TOLEDO provides a range of value-added service options to help ensure instrument uptime, provide quality results, and ensure regulatory compli...
Dodatki
Potrošni material
Programska oprema
More Information
| Thermostat | ||
| Heating | Electrical | |
| Cooling | Peltier | |
| Cooling Performance | 0°C 35 W 20°C 65 W 40°C 95 W | |
| Temperature Range | -40°C to 180°C (jacket temperature) | |
| Control Modes | isothermal and isoperibolic, constant or ramp, reflux, distillation & crystallization | |
| Stirring | 30 rpm to 1200 rpm | |
| Dimensions | Thermostat: 388 mm x 414 mm x 539 mm | |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz, 1300 VA | |
| Operation | iControl software for calorimetric applications Graphical touchscreen and/or iControl Software | |
| Reactors | ||
| Type | Single piece or two piece (with bottom drain valve) | |
| Volume | 1000 mL | |
| Pressure | 50 mbar to 1 bar | |
| Material | Duran® glass | |
| Stirrer | Pitch-blade (glass, Alloy 22) Anchor (glass, Alloy 22) Half-moon (PTFE for single piece reactor) | |
| Calorimetry | ||
| Type | Heat Flow | |
| Calibration Heater | Max. 20 W | |
| Precision Heat Transfer | Typically ± 3% | |
| Accuracy and Precision Specific Heat | Typically ± 10% | |
| Accuracy Heat Flow | Typically ± 3% to 5%, under isothermal conditions Typically ± 5% to 10%, under non-isothermal conditions | |
| Sensitivity | ≤0.1 W measured as standard deviation of qr under steady state conditions. Peak-to-peak noise is ≤ approximately 0.4 W. | |
| HFCal Module | ||
| Power and Data Interface | Direct connection to CAN interface of standard OptiMax, no additional power supply or PC connection required | |
| Data Logging | Via iControl Software | |
| Dimensions | 120 mm x 40 mm x 170 mm | |
| Software | iControl 5.2 or higher required, HFCal license |