Transmitter M100 SM RS-485

Transmitter M100 SM RS-485

For Analog or Digital Biocontrollers The M100 Sensor Mount (SM) is a single-channel transmitter for connecting ISM optical dissolved oxygen sensors to a biocontroller. The Bluetooth 4.0 interface is compatible with the PC-based and mobile versions of iSense software.

Straight-forward Connectivity

The M100 SM offers multiple independent interfaces: two configurable 4/20 mA analog outputs and one digital MODBUS RTU.

Clear Sensor Status Alerts

LEDs clearly indicate sensor status, alarms and warnings to ensure your sensor is working properly.

Easy Sensor Handling

ISM’s Plug and Measure feature minimizes the risk of installation trouble and simplifies sensor handling.

Позвонить специалисту

Технические характеристики - Transmitter M100 SM RS-485

Модельный ряд M100 SM
Параметры измерения Optical DO
Channels 1
Тип датчика ISM
Размеры Sensor Mount
Блок питания 24 VDC
Токовые выходы 2 x 0/4-20mA
Реле None
Digital input None
Analog input None
ПИД-регулятор None
User Interface None
Интерфейс USB No
Класс защиты IP67
Communication Bluetooth; MODBUS RTU
Wiring Mode 4-Wire
Разрешение на использование во взрывоопасных зонах No
Hygienic/Biocompatibility Approvals No
Other certificates CE compliant
Primary Media/Application Pharmaceutical/Life Science Production; Other Industrial Processes
Номер 30365367

Simplified installation
The M100 SM is an easy to install, sensor mount transmitter for the analog or digital integration of ISM optical dissolved oxygen sensors into a biocontroller‘s programmable logic controller.

Predictive maintenance
iSense Mobile and Bluetooth communication provide access at any time to ISM‘s predictive maintenance diagnostics. Diagnostics and other sensor data can be sent as an email from a mobile device.

Error-free operation
Transmitter current outputs are configurable via PC or mobile device. Reconfiguring is not necessary after a sensor exchange, eliminating configuration errors.

Electronic data management
Configuration and calibration data are stored on the sensor. Wireless communication allows this information to be sent to iSense where it can be used for sensor management and compliance purposes.

Datasheets & Brochures

Datasheets for Sensor Mount Transmitter M100 SM
The M100 Sensor Mount (SM) is a single-channel transmitter. It allows the connection on biocontrollers of 1-wire ISM sensors for measuring pH, ampDO a...
Линейка промышленных трансмиттеров M100/M200/M300/M400/M700/M800
Краткий справочник, посвященный серии промышленных трансмиттеров МЕТТЛЕР ТОЛЕДО для самых разных разных областей применения. Узнайте больше о возможно...

Instruction Manuals

Instruction Manuals for Sensor Mount Transmitter M100 SM
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits ar...
Application Solutions for M100 Modbus Programmers Guide
This programmers guides explains general modbus informations, implemented modbus registers in M100, detailed description of the implemented Modbus re...

Bus Communication Info

M100 2XH DTM Setup V1.00.0003
HART, DTM for PACTware ™: Version 4.x
Оформление запроса
Transmitter M100 SM RS-485
Hazardous Area
FM Approved
FDA