Transmitter M80 SM
ISM Solution for Benchtop Biocontrollers.The M80 Sensor-Mount (SM) transmitter is a compact, single-channel, multi-parameter transmitter designed especially for benchtop biocontroller manufacturers who wish to take advantage of ISM features on their SCADA systems.
Compact Size
The small footprint of the M80 SM allows it to be mounted to ISM sensors used in bioreactors with a typical volume of 1-20 liters.
Easy Integration of Sensor Data
A Modbus RTU interface enables integration of sensor measurement data, diagnostics and calibration routines into the bioreactor's control unit.
Transparent Sensor Health Information
Visualization of ISM features on your controller's graphical user interface increases transparency of the sensor models and health status.
Material No.: 30530566
Features
Robust Process Control
Processes run more reliably when digital sensors are integrated into control loops. The M80 SM allows you to access the predictive diagnostics and quick-setup features of the ISM sensors on your biocontroller for more robust cell cultures and fermentation runs.
A Scalable ISM Solution for your R&D
The small footprint of the M80 SM transmitter enables it to be used with benchtop bioreactors. This enables you to employ the advantages of ISM sensors that are often used in production in your R&D and down-scaling applications as well.
Less Configuration Effort
The need for sensor configuration is eliminated when a digital analytical sensor is replaced with a new one. The M80 SM transmitter stores installation-point-specific data such as the Modbus address and baud rate, which reduces time and effort when replacing a sensor.
Environmentally Friendly
pH sensors need to be disposed of on a regular basis. Compared to pH sensors with a built-in transmitter, the M80 SM helps to reduce electronic waste by up to 60%. The detachable, reusable M80 ensures you do not throw out a transmitter with each sensor.
Specifications - Transmitter M80 SM
| Parameter(s) | Conductivity Dissolved CO2 Dissolved Oxygen ORP pH |
| Sensor Type | ISM |
| Current Output(s) Digital Output | None |
| Analog Inputs | None |
| Inputs (2) | 0 |
| Communication | MODBUS RTU |
| Hazardous Area Approvals | No |
| Approvals and Certificates | CE compliant |
| Wired Mode | 4-Wire |
| Power Supply | 24 VDC (min. 100 mA) 8 – 30 VDC (min. 2 W) |
| User Interface | None |
| Relay Contact(s) | None |
| PID Controller | None |
| Channels | 1 |
| Protection Rating | IP65 |
| USB Interface | No |
| Size | Sensor Mount |
| Primary Media/Application | Other Industrial Processes Pharmaceutical/Life Science Production |
| Model Family | M80 |
| Robust Process Control Processes run more reliably when digital sensors are integrated into control loops. The M80 SM allows you to access the predictive diagnostics and easy set-up features of ISM sensors on your biocontroller for more robust cell culture and fermentation runs. |  |
Scalable ISM Solution for your R&D The small footprint of the M80 SM transmitter enables its use on benchtop bioreactors. This allows you to employ the advantages of ISM sensors that are often used in production in your R&D and down-scaling applications as well. |  |
Less Configuration Efforts The need of sensor configuration is eliminated when a digital analytical sensor is replaced by a new one. The M80 SM transmitter stores installation point specific data such as Modbus address and baud rate, reducing time and effort during sensor replacement. |  |
| Environmentally Friendly pH sensors must be disposed of on a regular basis. Compared to pH sensors with a built-in transmitter, the M80 SM helps to reduce electronic waste by up to 60%. The detachable, reusable M80 ensures you are not throwing out a transmitter with each sensor.. |  |
Datasheets
Data Sheet: M80 SM Transmitter (pdf - 427 KB)
Manuals
Manual for M80 Sensor Mount Transmitter (pdf - 2 MB)
Transmitter Configuration Box Instruction Manual (pdf - 228 KB)
Bus Communication Info
Transmitter Configuration Tools (TCT)
M80 Transmitter Configuration Tool software (zip - 7 MB)
