Transmitter M100 SM 1-Wire
For Analog or Digital Bio Controllers.The M100 Sensor Mount (SM) is a single-channel transmitter for connecting 1-wire ISM pH, DO (amperometric), and CO2 sensors to a biocontroller. The Bluetooth 4.0 interface is compatible with the PC-based and mobile versions of iSense software.
Straightforward Connectivity
The M100 SM offers multiple independent interfaces: two configurable 4/20 mA analog outputs and one digital MODBUS RTU.
Clear Sensor Status Alerts
LEDs clearly indicate sensor status, alarms, and warnings to ensure your sensor is working properly.
Easy Sensor Handling
ISM’s Plug and Measure feature minimizes the risk of installation issues and simplifies sensor handling.
رقم المادة: 30365366
سمات
Simplified installation
The M100 SM is an easy to install, sensor mount transmitter for the analog or digital integration of ISM optical dissolved oxygen sensors into a biocontroller's programmable logic controller.
Predictive Maintenance
iSense Mobile and Bluetooth communication provide access at any time to the ISM's predictive maintenance diagnostics. Diagnostics and other sensor data can be sent as an email from a mobile device.
Error-free Operation
Transmitter current outputs are configurable via PC or mobile device. Reconfiguring is not necessary after a sensor exchange, eliminating configuration errors.
Electronic Data Management
Configuration and calibration data are stored on the sensor. Wireless communication allows this information to be sent to iSense, where it can be used for sensor management and compliance purposes.
تحديد
المواصفات - Transmitter M100 SM 1-Wire
| Inputs (2) | 0 |
| Channels | 1 |
Simplified installation
The M100 SM is an easy to install, sensor mount transmitter for the analog or digital integration of ISM optical dissolved oxygen sensors into a biocontroller‘s programmable logic controller.
Predictive maintenance
iSense Mobile and Bluetooth communication provide access at any time to ISM‘s predictive maintenance diagnostics. Diagnostics and other sensor data can be sent as an email from a mobile device.
Error-free operation
Transmitter current outputs are configurable via PC or mobile device. Reconfiguring is not necessary after a sensor exchange, eliminating configuration errors.
Electronic data management
Configuration and calibration data are stored on the sensor. Wireless communication allows this information to be sent to iSense where it can be used for sensor management and compliance purposes.
التوثيق
أوراق البيانات
The M100 Sensor Mount (SM) is a single-channel transmitter. It allows the connection on biocontrollers of 1-wire ISM sensors for measuring pH, ampDO a...
Manuals
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits ar...
This instruction manual provides a brief information about techinical data, technical specifiations, operating elements(connections and LED messages)...
مُكَمِّلات
Sensor Calibration & Maintenance Tools
A universal device for connecting both 1-wire and RS485 ISM sensors to a computer running iSense software.
رقم المادة: 30130631
