O2 Sensor InPro6950iG/12/120
Trace Oxygen Measurement in Breweries.The InPro 6950iG/12/120 is an amperometric gas-phase oxygen sensor designed for trace oxygen measurement in CO2 recovery in breweries. This sensor uses Intelligent Sensor Management (ISM) diagnostics to reduce maintenance and downtime.
Accurate Trace Oxygen Measurement
The InPro 6950iG/12/120 provides an accuracy of ±5 ppm in CO2 recovery applications in breweries, where trace level accuracy is critical.
Save Money with CO2 Recovery
Using the InPro 6950iG/12/120 helps measure and capture CO2 from fermentation so you can reduce CO2 purchases for carbonation.
Real-Time Sensor Performance Monitoring
The InPro 6950iG/12/120 uses ISM technology to provide advanced analytics of sensor health, calibration needs, and remaining membrane lifetime.
رقم المادة: 52206443
سمات
Accurate at Low Oxygen Concentrations
The InPro 6950iG/12/120 offers reliable measurement between 5 and 50,000 ppm oxygen, at an accuracy of ±5 ppm. It gives you the low concentration measurements you need during CO2 recovery and separation to save you costs on CO2 purchases.
Fast Sensor Replacement for More Uptime
The InPro 6950iG/12/120 offers an easy-to-change membrane body and ISM Plug and Measure technology. Plug and Measure allows a sensor to be polarized and calibrated away from the process under lab conditions, and then inserted directly into the process.
Meets Your Installation Needs
The InPro 6950iG/12/120 offers a 120 mm length suitable for short to medium length installations. The membrane body includes a silicone O-ring and 316L stainless steel wetted parts, making it appropriate for CO2 recovery in the brewery industry.
Plan Maintenance with ISM Diagnostics
ISM technology in the InPro 6950iG/12/120 monitors sensor stress to provide a prediction for upcoming calibration needs. It also tracks the electrolyte level to identify evaporation and leakage, and informs you when refilling is required.
تحديد
المواصفات - O2 Sensor InPro6950iG/12/120
| Sensor Length | 120 mm |
| Detection limit | 5 ppm |
| Measuring Temp. Range | 0 °C – 40 °C |
| Mechanical Temp. Range | -5 °C – 121 °C |
| Operating Range | 5 ppm – 50,000 ppm |
| Mechanical Temperature Resistance (Celsius) | -5 °C – 121 °C |
| Measured Pressure Resistance | 0.2 bar – 9 bar |
| Mechanical Temperature Resistance (Fahrenheit) | 23 °F – 249.8 °F |
KALREZ is a registered trademark of E. I. Du Pont de Nemours and Company Corporation
Features and Benefits
| Accurate at Low Oxygen Concentrations The InPro 6950iG/12/120 offers reliable measurement between 5 and 50,000 ppm oxygen, at an accuracy of ±5 ppm. It gives you the low concentration measurements you need during CO2 recovery and separation to save you costs on CO2 purchases. |
| Fast Sensor Replacement for More Uptime The InPro 6950iG/12/120 offers an easy-to-change membrane body and ISM Plug and Measure technology. Plug and Measure allows a sensor to be polarized and calibrated away from the process under lab conditions, and then inserted directly into the process. |
| Meets Your Installation Needs The InPro 6950iG/12/120 offers a 120 mm length suitable for short to medium length installations. The membrane body includes a silicone O-ring and 316L stainless steel wetted parts, making it appropriate for CO2 recovery in the brewery industry. |
| Plan Maintenance with ISM Diagnostics ISM technology in the InPro 6950iG/12/120 monitors sensor stress to provide a prediction for upcoming calibration needs. It also tracks the electrolyte level to identify evaporation and leakage, and informs you when refilling is required. |
التوثيق
Application Notes
مُكَمِّلات
Sensor Calibration & Maintenance Tools
The DS AK9-RJ12 is a USB cable adaptor for connecting ISM 1-wire sensors to iSense software. This allows pH, DO and CO2 sensors to be evaluated, maintained and calibrated in the workshop or laboratory.
Diagnostics Away From the Transmitter
The iLink module allows you to access all of the diagnostics of your ISM sensors away from the process with iSense desktop software.
Application Profiling Drives Performance
Store application data on iSense and load directly into an ISM sensor. This allows sensors to learn from preceding sensors in the same process.
Easy Access to Paper Free Documentation
The iLink cable allows sensor calibration and adjustment protocols to be generated automatically in iSense and stored in a fully digital database.
رقم المادة: 52300383
