Transmitter M100 SM RS-485
For Analog or Digital Biocontrollers The M100 Sensor Mount (SM) is a single-channel transmitter for connecting ISM optical dissolved oxygen sensors to a biocontroller. The Bluetooth 4.0 interface is compatible with the PC-based and mobile versions of iSense software.
Straight-forward Connectivity
The M100 SM offers multiple independent interfaces: two configurable 4/20 mA analog outputs and one digital MODBUS RTU.
Clear Sensor Status Alerts
LEDs clearly indicate sensor status, alarms and warnings to ensure your sensor is working properly.
Easy Sensor Handling
ISM’s Plug and Measure feature minimizes the risk of installation trouble and simplifies sensor handling.
Caractéristiques
Spécifications - Transmitter M100 SM RS-485
| Gamme de modèles | M100 SM |
| Paramètres de mesure | Optical DO |
| Channels | 1 |
| Type de sonde | ISM |
| Taille | Sensor Mount |
| Alimentation électrique | 24 VDC |
| Sorties de courant | 2 x 0/4-20mA |
| Relais | None |
| Entrée numérique | None |
| Analog input | None |
| Régulateur PID | None |
| Interface utilisateur | None |
| Interface USB | No |
| Étanchéité | IP67 |
| Communication | Bluetooth; MODBUS RTU |
| Wiring Mode | 4-Wire |
| Homologation pour zones dangereuses | No |
| Hygienic/Biocompatibility Approvals | No |
| Other certificates | CE compliant |
| Primary Media/Application | Pharmaceutical/Life Science Production; Other Industrial Processes |
| Référence | 30365367 |
Simplified installation
The M100 SM is an easy to install, sensor mount transmitter for the analog or digital integration of ISM optical dissolved oxygen sensors into a biocontroller‘s programmable logic controller.
Predictive maintenance
iSense Mobile and Bluetooth communication provide access at any time to ISM‘s predictive maintenance diagnostics. Diagnostics and other sensor data can be sent as an email from a mobile device.
Error-free operation
Transmitter current outputs are configurable via PC or mobile device. Reconfiguring is not necessary after a sensor exchange, eliminating configuration errors.
Electronic data management
Configuration and calibration data are stored on the sensor. Wireless communication allows this information to be sent to iSense where it can be used for sensor management and compliance purposes.
Documentation
Datasheets & Brochures
The M100 Sensor Mount (SM) is a single-channel transmitter. It allows the connection on biocontrollers of 1-wire ISM sensors for measuring pH, ampDO a...
Instruction Manuals
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits ar...
This programmers guides explains general modbus informations, implemented modbus registers in M100, detailed description of the implemented Modbus re...
Bus Communication Info
HART, DTM for PACTware ™: Version 4.x
