Cleaning System EasyClean 100
Automated Sensor Rinsing.EasyClean100 has been developed to clean sensors installed in immersion housings. A specially designed spray head directs a jet of compressed air or flushing water at the sensing end of the sensor.
Cleaning in Open Basins or Channels
EasyClean 100 simplifies cleaning by enabling automatic sensor cleaning without removing the sensor and housing from the basin.
Removes Deposits that Interfere
Cleaning with water or compressed air, the EasyClean 100 creates turbulence that knocks away particles to prevent measurement interference.
Reduces Maintenance Efforts
Automated cleaning provides a more reliable measurement result without the need for a maintenance intervention.
Material No.: 52402304
Features
Cleaning While Sensor is Immersed
Conventional cleaning methods involve removing the whole installation from the basin. Using EasyClean100, this procedure can be fully automated, with the housing and sensor remaining in the immersed position.
Extend Sensor Life
Build up of particulate on a sensor can cause errors in the sensor's reading, or shorten the length of the life of a sensor. Automating cleaning keeps the sensor free of debris and extends the sensor's usable life.
Designed for InDip Immersion Housings
This cleaning system is designed to be integrated with InDip immersion housings. It's available in PVC or PVDF versions and is supplied with a 5 m hose (PTFE) and mounting kit for optimal fixation to the InDip housing.
Specifications - Cleaning System EasyClean 100
| Dimensions (HxWxD) | 220 mm x 260 mm x 80 mm |
| Flushing | Yes |
| Operating pressure for retractable housing | - |
| Protection Rating | IP65 |
| Ingress Protection | IP65 |
| Flushing Supply | 2-6 bar (29-87 psig) |
| Cleaning | Water Only |
| Calibration | No |
| Compressed Air Supply | None |
| Housing | Steel housing with polyester |
| Parameter(s) | pH / ORP / DO / CO2 / Cond / Trb |
| Ambient Temperature | 32 °F – 131 °F (0 °C – 55 °C) |
| Power Supply | 100-230 VAC 50-60hz 0.18-0.3A |
| Model Family | EasyClean 100 |
| Hazardous Area Approvals | No |
| Dimensions HWD | 260x220x80 mm (10.2"x8.7"x3.2") |
| Housing material | Steel with polyester |
| System Integration | No |
Description
When taking measurements in open basins or channels, e.g. in wastewater neutralization plants, the sensor is mounted in an immersion housing type InDip550. Conventional cleaning methods involve removing the whole installation from the basin. Using EasyClean100, this procedure can be fully automated, with the housing and sensor remaining in the immersed position.EasyClean100 consists of a control unit and a sprayhead. Air or water is sprayed directly at the tip of the electrode to ensure effective cleaning. It is therefore completely unnecessary to remove the installation from its mounted position. Cleaning is carried out automatically through actuation of the wash contact in the associated transmitter.
The sprayhead is directly mounted at the lower end of an InDip550 immersion housing. It is available made of PVC or PVDF and is delivered with a 5 m hose (PTFE) and a mounting kit for optimal fixation at the InDip housing. The hose to connect it with the EasyClean is delivered with the system.Features and Benefits
| Efficient cleaning |
|
| Regular maintenance |
|
| Automation of the maintenance sequence |
|
Product Brochures
Datasheets
Maintaining a clean sensor helps ensure accurate measurement.EasyClean™ automation systems help achieve regular sensor cleaning when needed, with mini...
Certificates
Technical Specifications
Only a clean sensor can provide reliable and accurate measurement results. With our EasyClean® systems, cleaning and calibration of sensors can be ful...
