
Manage your online profile and customize your mt.com experience
Browse a custom portfolio, access quotes, and manage your installed devices on our extended digital platform.
Maximize Bioreactor Productivity
In situ measurement of CO2 with the InPro 5000i 12/120 allows immediate reaction to CO2 changes to help maximize productivity in cell culture.
Sterilizable and Autoclavable
The InPro 5000i 12/120 is fully SIP resistant and autoclavable. It is made of FDA compliant materials, making it optimal for pharmaceutical processes.
Easy to Handle and Maintain
This CO2 sensor uses a membrane body concept to dramatically limit maintenance time. The inner body, a pH electrode, can easily be replaced on site.
Material No.: 30013606
The InPro 5000i provides a fast response time and high signal stability when measuring CO2 in bioreactors. It is designed to help you achieve real-time process control and maximize the productivity of your cell culture/fermentation.
This CO2 sensor uses Intelligent Sensor Management (ISM) technology. This provides pre-batch diagnostics for the best measurement performance and full traceability for complete documentation. The Plug and Measure feature supports seamless integration.
The InPro 5000i is steam sterilizable and autoclavable, making it optimal for pharmaceutical bioreactors. It is made of FDA compliant materials and is EHEDG certified for cleanability.
This CO2 sensor uses Intelligent Sensor Management (ISM) technology. This provides pre-batch diagnostics for the best measurement performance and full traceability for complete documentation. The Plug and Measure feature supports seamless integration.
Measurement Range: Concentration | 10–1000 mbar pCO2 |
Measurement Range (Concentration) | 0.145-14.5 psig pCO2 |
Accuracy | ± (10 % of the reading + 10 mbar) |
Hygienic/Biocompatibility Approvals | EHEDG EL Class 1, USP ClassVI/FDA/USP Class 7 |
Autoclavable/Sterilizable | Yes |
IP Rating | IP 67 |
CIP resistant | Yes |
Certificates & Approvals | Quality certificate, Material certificate 3.1, Surface finish certificate, FDA/USP Class IV |
Measurement Parameter | Carbon Dioxide |
Cable Connector | K8S |
ISM (Digital) or Analog | ISM (Digital) |
Wetted Metallic Material | 316L stainless steel |
Surface Roughnes of Wetted Material | N5/Ra16 (Ra=0.4μm/16μin) |
Sensor Diameter | 12mm |
O-Ring Material | Viton®, Silicone |
Measuring Temp. Range | 32 °F – 140 °F (0 °C – 60 °C) |
Mechanical Temp. Range | 32 °F – 275 °F (0 °C – 135 °C) |
Model Family | InPro 5000i |
Operating Pressure (Bar) | 0.200 bar–2.000 bar |
Operating Pressure (PSI) | 2.9 psi – 30 psi |
Primary Media/Application | Pharmaceutical/Life Science Production |
Process Connection | Pg 13.5 |
Response Time | T90 = < 120 s Air to CO2 @ 25°C |
Sensor Length | 120 mm |
Wetted membrane material | PTFE |
Measurement Technology | Potentiometric Severinghaus |
Connector Design | Straight |
Design Pressure | 44 psig (3 bar) |
Operating Range CO2 | 10 mbar – 1,000 mbar |
Measured Pressure Resistance | 0.2 bar – 2 bar |
The DS AK9-RJ12 is a USB cable adaptor for connecting ISM 1-wire sensors to iSense software. This allows pH, DO and CO2 sensors to be evaluated, maintained and calibrated in the workshop or laboratory.
Diagnostics Away From the Transmitter
The iLink module allows you to access all of the diagnostics of your ISM sensors away from the process with iSense desktop software.
Application Profiling Drives Performance
Store application data on iSense and load directly into an ISM sensor. This allows sensors to learn from preceding sensors in the same process.
Easy Access to Paper Free Documentation
The iLink cable allows sensor calibration and adjustment protocols to be generated automatically in iSense and stored in a fully digital database.
Material No.: 52300383
Material No.: 30130631
Material No.: 51340059
Material No.: 51300193
CO2 Sensor InPro5000i/12/120