Transmitter M100 2H DR
High Performance with a Small Footprint.The M100 DR is a DIN rail mounted single-channel, 2-wire process transmitter that supports multiple parameters and HART communication. It is compatible with pH/ORP, pH/pNa, DO and conductivity sensors.
Low Installation Cost
M100 DR is an easy-to-commission 2-wire transmitter for installations where space is at a premium.
Predictive Maintenance
Access to ISM predictive diagnostic tools available over HART leads to reduced maintenance and increased process uptime.
Plug & Measure Operation
With iSense software, sensors can be calibrated via a PC or mobile device, then connected to the M100 without the need to recalibrate.
Material No.: 30127720
Các chức năng
Small Footprint
The M100 DR is designed to be DIN rail mounted. It is suitable for 35 mm wide DIN rail systems, and gives you the functionality that you require for control, without a local display.
Integration & Control via HART
The transmitter configuration and integration of sensor diagnostics into asset management tools is possible thanks to the integrated HART protocol. This ensures maximum compatibility and easy integration.
Easy-to-Analyze Indicators
The M100 DR is outfitted with two LEDs to clearly indicate transmitter and sensor status, and to communicate alarms and warnings visually to on-site maintenance staff.
Thông số kỹ thuật
Các thông số - Transmitter M100 2H DR
| (Các) tham số | pH |
| Dòng điện ra | |
| Đầu vào Analog | |
| 1 | |
| Truyền Dữ Liệu | |
| lPhê duyệt cho khu vực nguy hiểm | Không |
| Phê duyệt và Chứng nhận | Tuân thủ tiêu chuẩn CE |
| Chế độ có dây | |
| Bộ cấp nguồn | |
| Giao diện Người dùng | |
| (Các) Công tắc Rơ-le | |
| Thiết bị Điều khiển PID | |
| 1 | |
| Vật liệu hộp | PA-FR |
| Chỉ số Bảo vệ | IP20 |
| Giao diện USB | |
| Kích cỡ | |
| Phương tiện truyền thông/ứng dụng chính | Các quy trình hóa học Các quy trình công nghiệp khác |
| Dòng model | M125 |
Small Footprint
The M100 DR is designed to be DIN rail mounted. It is suitable for 35 mm wide DIN rail systems, and gives you the functionality that you require for control, without a local display.
Integration & Control via HART
The transmitter configuration and integration of sensor diagnostics into asset management tools is possible thanks to the integrated HART protocol. This ensures maximum compatibility and easy integration.
Easy-to-Analyze Indicators
The M100 DR is outfitted with two LEDs to clearly indicate transmitter and sensor status, and to communicate alarms and warnings visually to on-site maintenance staff.
Tài liệu liên quan
Bảng dữ liệu
DIN Rail transmitter, high performance and minimal space requirement.
Thông số kỹ thuật
The M100 DR DIN rail transmitter is a 2-wire transmitter with HART® communication capability for analytical measurements. The M100 DR is a single-chan...
Manuals
These operating instructions offer important notes on handling of the M100 DR transmitter of METTLER TOLEDO. A prerequisite for safe work is complianc...
The M100 is a 2-wire head mount transmitter for analytical measurements with HART communication capabilities. The M100 is a single-channel, multi-para...
