OptiMax Starter Kit and HFCal
Material No.: 511628301
Thông số kỹ thuật
Các thông số - OptiMax Starter Kit and HFCal
| Trọng lượng | 35 kg |
| Thể tích Vận hành | 150 mL – 1.000 mL |
| Kích thước (CxRxS) | 78 cm x 39 cm x 42 cm |
| Giới hạn nhiệt độ | -40 °C – 180 °C |
| Chiếu đèn Phía sau / Phía Trước | Yes/Yes |
| Precision Heat Transfer | Typically +/- 3% |
| Accuracy and Precision Specific Heat | Typically +/-10% |
| Accuracy Heat Flow | Based on comparison of qr_hf with qc resp. ∫qr_hf with ∫ qc Isothermal conditions: ± 3 % to 5 % Non-isothermal conditions: ± 5 % to 10% |
| Calorimetry Type | Heat Flow |
| Vật liệu | OptiMax Starter Kit (51162830) and Upgrade Kit OptiMax HFCal (30050150) |
| Chế độ Nhiệt độ | Jacket control, reaction mixture control, distillation control, crystallization control |
| Gia nhiệt / Làm lạnh | Bộ ổn nhiệt Trạng thái Rắn |
| Yêu cầu Nguồn điện | 100 – 240 VAC, 50/60Hz |
Tài liệu liên quan
Bảng dữ liệu
Datasheets for EasyMax and OptiMax HFCal models include technical specifications and configuration options.
Tài liệu quảng cáo sản phẩm
View the full catalog of chemical synthesis reactors, workstations, and accessories. Find what you need for your lab!
Thông tin sản phẩm mở rộng
Guide on how to operate your OptiMax chemical synthesis workstation.
METTLER TOLEDO provides a range of value-added service options to help ensure instrument uptime, provide quality results, and ensure regulatory compli...
Phụ kiện
Vật tư tiêu hao
Phần mềm
More Information
| Thermostat | ||
| Heating | Electrical | |
| Cooling | Peltier | |
| Cooling Performance | 0°C 35 W 20°C 65 W 40°C 95 W | |
| Temperature Range | -40°C to 180°C (jacket temperature) | |
| Control Modes | isothermal and isoperibolic, constant or ramp, reflux, distillation & crystallization | |
| Stirring | 30 rpm to 1200 rpm | |
| Dimensions | Thermostat: 388 mm x 414 mm x 539 mm | |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz, 1300 VA | |
| Operation | iControl software for calorimetric applications Graphical touchscreen and/or iControl Software | |
| Reactors | ||
| Type | Single piece or two piece (with bottom drain valve) | |
| Volume | 1000 mL | |
| Pressure | 50 mbar to 1 bar | |
| Material | Duran® glass | |
| Stirrer | Pitch-blade (glass, Alloy 22) Anchor (glass, Alloy 22) Half-moon (PTFE for single piece reactor) | |
| Calorimetry | ||
| Type | Heat Flow | |
| Calibration Heater | Max. 20 W | |
| Precision Heat Transfer | Typically ± 3% | |
| Accuracy and Precision Specific Heat | Typically ± 10% | |
| Accuracy Heat Flow | Typically ± 3% to 5%, under isothermal conditions Typically ± 5% to 10%, under non-isothermal conditions | |
| Sensitivity | ≤0.1 W measured as standard deviation of qr under steady state conditions. Peak-to-peak noise is ≤ approximately 0.4 W. | |
| HFCal Module | ||
| Power and Data Interface | Direct connection to CAN interface of standard OptiMax, no additional power supply or PC connection required | |
| Data Logging | Via iControl Software | |
| Dimensions | 120 mm x 40 mm x 170 mm | |
| Software | iControl 5.2 or higher required, HFCal license |