manual repeater pipette accessories

Repeater Pipette Accessories

Add-Ons for Manual and Electronic Repeater Pipettes

Accessories for manual repeater pipettes include Encode syringe tips, sterile syringe adapters, batteries, and shelf mounts. These are the perfect additions to optimize your repeat pipetting experience.

Call for Quote
View Results (12)
12 Results
Filter (12)

Tips 10 µL Filter 960/10   GP-10F

Green-Pak™ individual refills, 10 μL max. volume, universal-fit, pre-sterilized, filter, 960 tips in 10 rack refills (GP-10F).

Show full specs

Stand NanoRep

Benchtop stand, non-charging, for the Rainin NanoRep™ electronic repeater pipette.

Show full specs

Wall Power Supply E4-WPS Level VI

Wall power supply for recharging the Rainin NanoRep™ battery. Use NanoRep while charging. 110-240 VAC, 50/60 Hz, 0.5 A.

Show full specs

Rail Hang Ups NanoRep (3)

Shelf hang-ups (3) with rear screw bracket. Hang-ups fit any Rainin pipette.

Show full specs

Adapter f/Recharging Base AR-ADP

Adapter for recharging base 17004324 for AutoRep™ E electronic repeater, 110 VAC, 50 / 60 Hz (AR-ADP).

Show full specs

Battery AutoRep E AR-BA

Battery pack for AutoRep™ E electronic repeater, NiMH (nickel-metal hydride). NiMH (nickel-metal hydride) (AR-RB).

Show full specs
Add 1 or 2 more products to compare

Documents

AutoRep M Pipette Manual Operating instructions
This manual provides a complete overview of the operating instructions for the AutoRep M Pipette.
800 472 4646 (800 4 RAININ)
Call Service

Expert Service – Tailored to Fit Your Pipetting Needs

METTLER TOLEDO supports and services your pipettes through their entire life-cycle, from good pipetting techniques to preventive maintenance and calibration to equipment repair.

Uptime
Support & Repair
Performance
Maintenance & Optimization
Compliance
Calibration & Quality
Expertise
Training & Consulting

More information and helpful tips

Maintenance for AutoRep M

The AutoRep M is calibrated at the factory and is maintenance-free. It may be cleaned with water or isopropyl alcohol. The AutoRep M contains no user-serviceable parts. Never attempt to disassemble the AutoRep M.

How to remove the encode tip

  1. Hold the AutoRep M over a vessel.
  2. Empty the Encode tip by pushing the locking/filling lever to its lower stop.
  3. Pull out the locking/filling lever slightly and swing it out.
  4. Remove the Encode tip. The adapter required for 25 mL and 50 mL Encode tip is reusable.
This page is not optimized for your web browser. Consider using a different browser or upgrade your browser to the latest version to ensure the best experience.