EasySampler 1210 System, Complete
產品編號: 30083901
規格
詳細說明 - EasySampler 1210 System, Complete
| 溫度範圍 | -20 °C – 140 °C |
| 材質 | PP 鋁 不鏽鋼 PTFE 陶瓷 |
| 稀釋因數 | |
| 支架 | |
| 外形尺寸 (長x高x寬) | 500 mm x 465 mm x 310 mm |
| 重量 | 9 kg |
| 功率 |
EasySampler was designed to eliminate these challenges by providing an automated and robust inline method of taking representative samples from reactions, even at extreme conditions.
Common EasySampler applications include:
- Impurity Profiling
- Product Formation
- By-Product Formation
- Sampling for Impurity Profiling
- Reaction Progress by Offline Analysis
- Yield
- Air-Sensitive Reactions
- Low-Temperature Reactions (to -20 °C)
- Moisture-Sensitive Chemistry
- Sampling Hazardous Reactions
文件
Datasheets
Unattended, representative automated sampling for a wide range of chemical reactions
Product Brochures
Eliminate chemical reaction sampling challenges by using an automated and robust method of taking representative samples
Extended Product Information
This Quick Start Guide provides step-by-step instructions to set-up EasySampler for unattended automated sampling.
EasySampler 1210 enables automated and unattended sampling of chemical reactions 24/7. Please also read the Operating Instructions for the full scope...
This Quick Start Guide provides step-by-step instructions to connect EasySampler to EasyMax, OptiMax, or RX-10 using the EasySampler Connectivity Kit.
The EasySampler Connectivity Kit integrates EasySampler function with EasyMax™ Advanced, OptiMax™, RX-10™, and RC1mx™ touchscreen or iControl software...
User Operating Instructions Manual for EasySampler 1210
Tips and tricks for EasySampler, including set-up, probe introduction, data management and sampling for different types of reactions.
Get the best from your equipment. Develop your equipment maintenance and support strategy through METTLER TOLEDO services.
Frequently Asked Questions (FAQs) for EasySampler
配件
耗材
軟體
More Information
- EasySampler Installation - System Complete
- EasySampler Installation - Sampling Probe
- EasySampler Installation - Connectivity Kit, Power Supply, and Rinse Kit
- EasySampler Installation - Prepare the System Part 1
- EasySampler Installation - Prepare the System Part 2
- EasySampler & EasyMax - Prepare the System
- Change a Sleeve on the EasySampler Original Probe
- Change Tubing in the Original EasySampler Probe Conduit
- Change the Solvent Tubing
- Replace the Needle
- Change a Vial Rack
- Update EasySampler Firmware
- Replacing the EasySampler Probe Head Tubing
- Change a Sleeve on the New Style EasySampler Probe
- How to Install & Use the EasySampler Pump Rinsing Set
