OptiMax Starter Kit and HFCal
產品編號: 511628301
規格
詳細說明 - OptiMax Starter Kit and HFCal
| 重量 | 35 kg |
| 操作容量 | 150 mL – 1,000 mL |
| 外形尺寸 (高x寬x深) | 78 cm x 39 cm x 42 cm |
| 溫度範圍 | -40 °C – 180 °C |
| 背光/前光 | Yes/Yes |
| 傳熱精確性 | Typically +/- 3% |
| 準確性和精準度比熱 | Typically +/-10% |
| 準確性熱流 | Based on comparison of qr_hf with qc resp. ∫qr_hf with ∫ qc Isothermal conditions: ± 3 % to 5 % Non-isothermal conditions: ± 5 % to 10% |
| 量熱儀類型 | Heat Flow |
| 材質 | OptiMax Starter Kit (51162830) and Upgrade Kit OptiMax HFCal (30050150) |
| 溫度模式 | Jacket control, reaction mixture control, distillation control, crystallization control |
| 加熱/冷卻 | Solid State Thermostat |
| 電源需求 | 100 – 240 VAC, 50/60Hz |
文件
單張型錄
Datasheets for EasyMax and OptiMax HFCal models include technical specifications and configuration options.
產品手冊
View the full catalog of chemical synthesis reactors, workstations, and accessories. Find what you need for your lab!
延伸產品資訊
Guide on how to operate your OptiMax chemical synthesis workstation.
METTLER TOLEDO provides a range of value-added service options to help ensure instrument uptime, provide quality results, and ensure regulatory compli...
配件
耗材
軟體
More Information
| Thermostat | ||
| Heating | Electrical | |
| Cooling | Peltier | |
| Cooling Performance | 0°C 35 W 20°C 65 W 40°C 95 W | |
| Temperature Range | -40°C to 180°C (jacket temperature) | |
| Control Modes | isothermal and isoperibolic, constant or ramp, reflux, distillation & crystallization | |
| Stirring | 30 rpm to 1200 rpm | |
| Dimensions | Thermostat: 388 mm x 414 mm x 539 mm | |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz, 1300 VA | |
| Operation | iControl software for calorimetric applications Graphical touchscreen and/or iControl Software | |
| Reactors | ||
| Type | Single piece or two piece (with bottom drain valve) | |
| Volume | 1000 mL | |
| Pressure | 50 mbar to 1 bar | |
| Material | Duran® glass | |
| Stirrer | Pitch-blade (glass, Alloy 22) Anchor (glass, Alloy 22) Half-moon (PTFE for single piece reactor) | |
| Calorimetry | ||
| Type | Heat Flow | |
| Calibration Heater | Max. 20 W | |
| Precision Heat Transfer | Typically ± 3% | |
| Accuracy and Precision Specific Heat | Typically ± 10% | |
| Accuracy Heat Flow | Typically ± 3% to 5%, under isothermal conditions Typically ± 5% to 10%, under non-isothermal conditions | |
| Sensitivity | ≤0.1 W measured as standard deviation of qr under steady state conditions. Peak-to-peak noise is ≤ approximately 0.4 W. | |
| HFCal Module | ||
| Power and Data Interface | Direct connection to CAN interface of standard OptiMax, no additional power supply or PC connection required | |
| Data Logging | Via iControl Software | |
| Dimensions | 120 mm x 40 mm x 170 mm | |
| Software | iControl 5.2 or higher required, HFCal license |