XS3 CC H Checkweigher Combination System - Discontinued Product

The Hygiene Standard for Highest Demands

While the checkweigher measures product weights quickly and precisely, rejecting "out of tolerance" products, the metal detector reliably detects and rejects products contaminated by metal. Common contaminants detected range from nuts and bolts, right down to small metal filings, staples, needles or pieces of wire. The rejection of "bad" products is ensured by two rejecting devices – a system which allows separate rejection of metal-contaminated and off-weight products.

The checkweighing function is performed using a fully functional and globally proven Garvens XS3 checkweigher. This ensures highly accurate dynamic weight measurement with an accuracy from ±0.2 g. 

Product and water build-up is minimised by avoiding level surfaces on the conveyor and weighcell supports, as well as the exclusive use of circular tubes on the horizontal section of the frame. The minimal contact conveyor support clamps and open frame construction facilitate easy cleaning. Seam welding improves hygiene and reduces the risk of bacteria build-up. With the reduced number of support legs, hygienically designed cable runs and an additional "customer's cable" duct, Garvens offer a flexible system specifically to your requirements.