OptiMax Starter Kit and HFCal
Material nr.: 511628301
Specifikationer
Specifikationer - OptiMax Starter Kit and HFCal
| Vikt | 35 kg |
| Driftvolym | 150 mL – 1 000 mL |
| Dimensioner (HxBxD) | 78 cm x 39 cm x 42 cm |
| Temperaturområde | -40 °C – 180 °C |
| Bak-/framlampa | Yes/Yes |
| Precisionsvärmeöverföring | Typically +/- 3% |
| Noggrannhets- och precisionsspecifik värme | Typically +/-10% |
| Noggrannhet värmeflöde | Based on comparison of qr_hf with qc resp. ∫qr_hf with ∫ qc Isothermal conditions: ± 3 % to 5 % Non-isothermal conditions: ± 5 % to 10% |
| Värmemätningstyp | Värmeflöde |
| Material | OptiMax Starter Kit (51162830) and Upgrade Kit OptiMax HFCal (30050150) |
| Temperaturläge | Jacket control, reaction mixture control, distillation control, crystallization control |
| Uppvärmning/kylning | Solid State Thermostat |
| Effektbehov | 100 – 240 VAC, 50/60Hz |
Dokumentation
Datablad
Datasheets for EasyMax and OptiMax HFCal models include technical specifications and configuration options.
Produktbroschyrer
View the full catalog of chemical synthesis reactors, workstations, and accessories. Find what you need for your lab!
Kompletterande produktinformation
Guide on how to operate your OptiMax chemical synthesis workstation.
METTLER TOLEDO provides a range of value-added service options to help ensure instrument uptime, provide quality results, and ensure regulatory compli...
Tillbehör
Förbrukningsvaror
Software
More Information
| Thermostat | ||
| Heating | Electrical | |
| Cooling | Peltier | |
| Cooling Performance | 0°C 35 W 20°C 65 W 40°C 95 W | |
| Temperature Range | -40°C to 180°C (jacket temperature) | |
| Control Modes | isothermal and isoperibolic, constant or ramp, reflux, distillation & crystallization | |
| Stirring | 30 rpm to 1200 rpm | |
| Dimensions | Thermostat: 388 mm x 414 mm x 539 mm | |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz, 1300 VA | |
| Operation | iControl software for calorimetric applications Graphical touchscreen and/or iControl Software | |
| Reactors | ||
| Type | Single piece or two piece (with bottom drain valve) | |
| Volume | 1000 mL | |
| Pressure | 50 mbar to 1 bar | |
| Material | Duran® glass | |
| Stirrer | Pitch-blade (glass, Alloy 22) Anchor (glass, Alloy 22) Half-moon (PTFE for single piece reactor) | |
| Calorimetry | ||
| Type | Heat Flow | |
| Calibration Heater | Max. 20 W | |
| Precision Heat Transfer | Typically ± 3% | |
| Accuracy and Precision Specific Heat | Typically ± 10% | |
| Accuracy Heat Flow | Typically ± 3% to 5%, under isothermal conditions Typically ± 5% to 10%, under non-isothermal conditions | |
| Sensitivity | ≤0.1 W measured as standard deviation of qr under steady state conditions. Peak-to-peak noise is ≤ approximately 0.4 W. | |
| HFCal Module | ||
| Power and Data Interface | Direct connection to CAN interface of standard OptiMax, no additional power supply or PC connection required | |
| Data Logging | Via iControl Software | |
| Dimensions | 120 mm x 40 mm x 170 mm | |
| Software | iControl 5.2 or higher required, HFCal license |