Cleaning System EasyClean 500
Automated measurement point maintenance.The EasyClean 500 is used for fully automatic cleaning and calibration of pH, ORP or oxygen measurement points. It provides a flexible system solution that can be utilized for continuous or periodic measurement.
Up to 80% Lower Maintenance
The only technician intervention on an EasyClean 500 system is periodic refilling of cleaning and buffer solutions, plus occasional sensor exchanges.
Reliable Process Control
Automated sensor maintenance with the EasyClean 500 and ISM's predictive diagnostics ensure reliable measurements and process consistency.
Keeps Employees Safe
Automated maintenance limits personnel's exposure to health-hazardous environments, helping to keep them safe.
Material No.: 30900558
Features
For High-Maintenance Measurement Points
Some maintenance-intensive measurement points in harsh process conditions are too expensive to operate. The EasyClean 500 cleans the sensors automatically as often as required, making such measurement points economically viable.
Leverage the Power of ISM
The system leverages the Intelligent Sensor Management (ISM) platform, including error-free plug-and-measure sensor installation, automatically triggering of calibration whenever it is required, and precise data on when the sensor will need replaced.
Expert Servicing
Installation and regular system maintenance by METTLER TOLEDO Service experts help ensure the EasyClean 500 is always running exactly as it should - without disruption.
Specifications
Specifications - Cleaning System EasyClean 500
| Operating pressure for retractable housing | 0.4 - 0.8 MPa (4 - 8 bar 58 - 116 psi) |
| Protection Rating | IP 65 |
| Rinsing | Yes |
| Cleaning | Yes |
| Calibration | Yes |
| Compressed Air Supply | 0.4 - 1 MPa (4 - 10 bar 58 - 145 psi) |
| Parameter(s) | pH / ORP/ DO |
| Ambient Temperature | 2 °C – 55 °C 35.6 °F – 131 °F |
| Power Supply | 15V - 30 V/100mA |
| Model Family | EasyClean 500 |
| Pressurized Water | 0.2 - 0.6 MPa (2 - 6 bar 29 - 87 psi) |
| Approvals and Certificates | CE compliant |
| Enclosure Material | 316L Stainless steel |
Documentation
Datasheets
EasyClean 500(X) is a compact cleaning and calibration system for fully automated routine maintenance of process analytical sensors. The EasyClean 500...
Manuals
The EasyClean 500(X) is a controller for fully automated cleaning and calibration of pH/ORP and oxygen measurements.
The making of the EasyClean 500(X) uses the best technology and obeys all the safety regulations in force. The EasyClean 500(X) is a controller for fu...
Bus communication Info
Transmitter Configuration Tools(TCT)
Software Tools
Accessories
M400 Process Transmitter
M400 2H Type 2 is a 1-channel, 2-wire, low power transmitter. It is compatible with analog and digital sensors, including pH/ORP, pH/pNa, conductivity 2e/4e, amp. O2, opt. O2 and CO2 (pharma). It features PID control, 2 OC digital outputs and HART.
Material No.: 30655902
M400 2XH Type 2 is a 1-channel, 2-wire, intrinsically-safe transmitter. It is used for analog and digital sensors, including pH/ORP, pH/pNa, conductivity 2e/4e, amp./opt. O2 and CO2 (pharma). It features PID control, 2 OC digital outputs and HART.
Material No.: 30655901
M400 2XH Type 2 ISM is a 1-channel, 2-wire, intrinsically-safe transmitter. It is compatible with digital pH/ORP, pH/pNa, conductivity 4e, amp. O2, opt. O2 and CO2 (pharma) sensors. It features PID control, 2 OC digital outputs and HART.
Material No.: 30655903
M400 2H Type 2 ISM is a 1-channel, 2-wire, low power transmitter. It is compatible with digital pH/ORP, pH/pNa, conductivity 4e, amp. O2, opt. O2 and CO2 (pharma) sensors. It features PID control, 2 OC digital outputs and HART.
Material No.: 30655904
M400 2XH Type 3 is a 1-channel, 2-wire, intrinsically-safe transmitter. It is for analog and digital pH/ORP, pH/pNa, conductivity 2e/4e, amp.O2 (gas), opt.O2 , CO2 (pharma) sensors. It features PID control, 2 OC digital outputs and HART.
Material No.: 30655905
M400 2XH Type 3 ISM is a 1-channel, 2-wire, intrinsically-safe transmitter. It is compatible with digital pH/ORP, pH/pNa, conductivity 2e/4e, amp.O2 (gas), opt.O2 and CO2 (pharma) sensors. It features PID control, 2 OC digital outputs and HART.
Material No.: 30655908
Consumables
Buffers for In-Line pH Sensors
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single container holds 5000 mL of pH 4.01 buffer solution.
Material No.: 51319012
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single container holds 5000 mL of pH 7.00 buffer solution.
Material No.: 51319016
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single container holds 5000 mL of pH 9.21 buffer solution.
Material No.: 51319017
