pH Sensor InPro4281i/SG/120
Rugged, Long-Lasting pH Probe.The InPro 4281i is a pH probe with a titanium shaft for exceptional durability in demanding chemical applications. It provides ISM advanced diagnostics to optimize maintenance decisions and sensor lifetime.
Withstands Demanding Applications
The InPro 4281i uses a polymer reference system and a titanium shaft for reliable pH measurement, even under difficult industrial conditions.
Advanced Predictive Diagnostics
This pH sensor has Intelligent Sensor Management (ISM) technology, offering predictive diagnostics to reduce maintenance and simplify calibration.
Accurate pH Measurement
The InPro 4281i provides a wide measurement range from 1-14 pH and has a solution ground for enhanced stability.
Material No.: 30301402
Features
Eliminates Clogging & Resists Poisons
The InPro 4281i features an open junction Argenthal reference system with a Xerolyt® Extra polymer electrolyte that eliminates sensor clogging and ensures the sensor is resistant to poisoning, solvents, and strongly acidic or basic conditions.
Optimizes Maintenance Cycles
This pH sensor features intelligent diagnostics to help manage your maintenance. The sensor provides a clear display of its remaining lifetime, time remaining until calibration is needed and indicates when the sensor will need to be cleaned.
Suitable for Hazardous Conditions
The InPro 4281i is ATEX and FM certified for hazardous areas. It can withstand temperatures up to 176°F (80°C) and has a titanium shaft to resist the daily knocks of industrial manufacturing.
Fast Replacement of Sensors
Ensure the safety of the maintenance team with the ability to Plug & Measure. The InPro 4281i can be calibrated away from the process and then quickly swapped into the process environment without the need to recalibrate.
Specifications
Specifications - pH Sensor InPro4281i/SG/120
| ISM (Digital) or Analog | ISM (Digital) |
| pH Sensing Technology | Glass Membrane Suitable For Low Temperatures (LoT) |
| pH Range | 1 – 14 |
| Reference System | Xerolyt Extra polymer electrolyte, open double junction, Argenthal cartridge with silver-ion trap |
| Operating Temperature (Fahrenheit) | 32 °F - 176 °F |
| Operating Temperature (Celsius) | 0 °C - 80 °C |
| Cable Connector | K8S |
| Process Connection | Pg 13.5 Thread |
| Sterilizable/Autoclavable | No |
| Sensor Length | 120 mm |
| Certificates & Approvals | ATEX/IECEx: Ex ia IIC T6/T5/T4/T3 Ga/Gb CE FM: IS Cl. I, II, III, Div 1, GR ABCDEFG/T6 METTLER TOLEDO Quality Certificate PED |
| Operating Pressure (Bar) | 0 to 15 barg @ 25°C |
| Model Family | InPro4260(i) |
| Temperature Sensor | Digital |
| Measurement Parameter | pH |
| Shaft Material | Titanium |
| Operating Pressure (PSI) | 0 to 217 psig @ 77°F |
| Solution Ground/Redox Metal | Titanium |
| Refillable Electrolyte | No |
| Hazardous Area Approvals | Yes |
| Primary Media/Application | Chemical Processes |
| Hygienic/Biocompatibility Approvals | No |
Documentation
Certificates
Application Notes
Accessories
Sensor Calibration & Maintenance Tools
The DS AK9-RJ12 is a USB cable adaptor for connecting ISM 1-wire sensors to iSense software. This allows pH, DO and CO2 sensors to be evaluated, maintained and calibrated in the workshop or laboratory.
Diagnostics Away From the Transmitter
The iLink module allows you to access all of the diagnostics of your ISM sensors away from the process with iSense desktop software.
Application Profiling Drives Performance
Store application data on iSense and load directly into an ISM sensor. This allows sensors to learn from preceding sensors in the same process.
Easy Access to Paper Free Documentation
The iLink cable allows sensor calibration and adjustment protocols to be generated automatically in iSense and stored in a fully digital database.
Material No.: 52300383
A universal device for connecting both 1-wire and RS485 ISM sensors to a computer running iSense software.
Material No.: 30130631
Sensor Simulation & Validation
Consumables
Buffers for In-Line pH Sensors
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This package contains six bottles of 250mL of pH 2.00 buffer solution.
Material No.: 51319010
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single bottle contains 1000 mL of pH 2.00 buffer solution.
Material No.: 51319011
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This package contains six bottles of 250mL of pH 4.01 buffer solution.
Material No.: 51340058
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single bottle contains 1000 mL of pH 4.01 buffer solution.
Material No.: 51340228
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This package contains six bottles of 250mL of pH 7.00 buffer solution.
Material No.: 51340060
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single bottle contains 1000 mL of pH 7.00 buffer solution.
Material No.: 51340229
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This package contains six bottles of 250mL of pH 9.21 buffer solution.
Material No.: 51300194
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single bottle contains 1000 mL of pH 9.21 buffer solution.
Material No.: 51340230
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This package contains six bottles of 250mL of pH 10.00 buffer solution.
Material No.: 51340231
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single bottle contains 1000 mL of pH 10.00 buffer solution.
Material No.: 51340232
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single container holds 5000 mL of pH 4.01 buffer solution.
Material No.: 51319012
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single container holds 5000 mL of pH 7.00 buffer solution.
Material No.: 51319016
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single container holds 5000 mL of pH 9.21 buffer solution.
Material No.: 51319017
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single bottle contains 250 mL of pH 2.00 buffer solution.
Material No.: 51340055
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single bottle contains 250 mL of pH 4.01 buffer solution.
Material No.: 51340057
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single bottle contains 250 mL of pH 7.00 buffer solution.
Material No.: 51340059
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single bottle contains 250 mL of pH 9.21 buffer solution.
Material No.: 51300193
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single bottle contains 250 mL of pH 10.00 buffer solution.
Material No.: 51340056
