
The M100 Sensor Mount (SM) is a single-channel transmitter. It allows the connection on biocontrollers of ISM sensors optical DO sensors. The M100 SM has a BT 4.0 interface which is compatible with the PC-based and mobile versions of iSense software.
Two independent interfaces are implemented: two configurable 4/20 mA analog outputs and one digital MODBUS RTU.
LEDs clearly indicate sensor status, alarms and warnings.
ISM’s Plug and Measure feature minimizes the risk of installation trouble and simplifies sensor handling.
ISM features | Plug and Measure, DLI, ACT, TTM |
Enclosure | IP 67 |
Mounting | On head of RS 485 sensor: VP8 |
Supply voltage | 24 VDC |
Analog output | Active 2 × 4 to 20 mA, galvanically isolated to passive DCS card |
Communication | Wireless: BT 4.0 iSense PC-based and iSense mobile (Android, iOS)<br>Wired: Digital interface RS 485 MODBUS RTU |
Sensor compatibility | ISM RS485 optical DO sensors |
Ordering information | |
Designation | <b>Order No.</b> |
M100 SM 1-wire | 30 365 367 |
Features and Benefits
Simplified installation
The M100 SM is an easy to install, sensor mount transmitter for the analog or digital integration of ISM optical dissolved oxygen sensors into a biocontroller‘s programmable logic controller.
Predictive maintenance
iSense Mobile and Bluetooth communication provide access at any time to ISM‘s predictive maintenance diagnostics. Diagnostics and other sensor data can be sent as an email from a mobile device.
Error-free operation
Transmitter current outputs are configurable via PC or mobile device. Reconfiguring is not necessary after a sensor exchange, eliminating configuration errors.
Electronic data management
Configuration and calibration data are stored on the sensor. Wireless communication allows this information to be sent to iSense where it can be used for sensor management and compliance purposes.