Gravity Fall Metal Detectors

Gravity Fall Metal Detectors

Free-fall metal detectors for inspection of bulk, gravity-fed powders, grains or granules

Our high-performance gravity fall metal detection systems seamlessly detect and reject contaminants in free-falling, powdered and granular food, cosmetic, and chemical product applications. Our efficient rejection systems, latest productivity optimizing technology, unique optional Automatic Test System, and ability to integrate with your existing equipment will speed up your operations and help maximize your profits!

Call for Quote
View Results (51)
51 Results
Filter (51)

Weighing System SPC215-111

Show full specs

Weighing Module WMF204C-L/IE

設計流線精巧的 WMF 模組,專為直接連至控制系統的多線自動化網路所設計。.

Show full specs

Weigh module SPE404-C

SPE稱重模組與強化設計、高精確度稱重效能和便利的模組化功能相結合。.

Show full specs

Weighing Module WKC6002C

WKC稱重模組能定期進行內建的樣品檢查,確保長期的製程穩定性。.

Show full specs

Weigh Module WXS26S/15

稱重模組.

Show full specs

High Precision Weigh Module SLF630xx

SLF6 系列荷重元的可稱重範圍為 6 至 60 公斤,非常適合用於不同的應用與產業。.

Show full specs
Add 1 or 2 more products to compare

Uptime
Support & Repair
Performance
Maintenance & Optimization
Compliance
Calibration & Quality
Expertise
Training & Consulting

FAQs

How do gravity fall metal detector systems work?

Gravity fall metal detector systems (also known as "freefall metal detectors" or "gravity-fed metal detectors") are suitable for the inspection of any free-flowing powder or granular products, which includes metal detection for the flour and grain industry, metal detection for the sugar industry as well as metal detection for manufacturers that produce milk powder, dried fruits, and peanuts.

Commonly used for metal detection in food processing, gravity fall metal detectors work by having the product flow through the production line, free-falling under gravity through a small metal detector aperture to achieve high sensitivity. If metal is detected, a fully automatic, high-speed reject device diverts the contaminated product and isolates it from the main product flow.

While not exactly the same, throat or VFFS metal detectors are similar to gravity-fall systems in that they inspect free-falling product under gravity, but throat metal detectors do not have an integrated reject system. Instead, they are combined with a multi-head weigher and bagmaker; if contamination is detected, they will either send a signal to the bagmaker to make a double bag over the contaminated product, or simply stop the line so the contamination can be removed from the production line.

Related Content:

 

How do I pick the best gravity fed metal detector system?

Gravity fall metal detection systems are designed specifically for the inspection of free-falling powders and granular products in non-pressurized applications, incorporating different reject devices according to the application. Y-valve Gravity Fall systems are suitable for the inspection of powders and granular products. It’s quick release and captive reject mechanism simplifies cleaning procedures, which is especially ideal when product changeovers are frequent and when regular cleaning between production batches is required.

Sealtite Gravity Fall systems feature an innovative design to provide a dust-tight seal. This virtually eliminates the escape of uncontaminated products into the reject channel, reducing product waste. Sealtite technology is ideal for inspection of high-value, dusty products in explosive environments and applications where production space is limited.

Open Diverter Gravity Fall systems provide a cost-effective solution for non-dusty products, and can be upgraded to Sealtite standards retrospectively if required. This system is best for non-dusty granular products where production space is limited.

METTLER TOLEDO Safeline is a global manufacturer of industrial metal detection systems designed for a variety of production environments and product applications, such as food and beverages, pharmaceuticals and nutraceuticals, cosmetics and personal care, chemicals and more.

How can a gravity fall metal detection system boost productivity?

METTLER TOLEDO Safeline's Profile technology allows manufacturers to reduce the frequency of routine metal detector performance monitoring tests through Reduced Test (RT) Mode. RT Mode enables the metal detector to operate at a higher level of sensitivity than required, monitoring the metal detector's performance to a level of certainty where the frequency of routine performance monitoring can be significantly reduced (subject to quarantine periods).

Another important tool called the Automatic Test System (ATS) can boost productivity and worker safety on the production line by eliminating the need to test at height for most routine performance monitoring tests. ATS decreases the time required to conduct performance monitoring tests by >80% (from 3-5 minutes per line, to under 45 seconds per line). ATS is the only method that can consistently confirm worst-case sensitivity performance, delivering enhanced compliance and greater brand protection.

In some cases, depending on the testing protocol undertaken by your business, Reduced Test Mode and ATS can lead to significant uptime advantages, improved overall equipment effectiveness (OEE), and increased cost savings.

Related Content:

 

Are there gravity fall metal detectors that are ATEX, IECEx or Hazloc compliant for potentially explosive atmospheres?

Yes, there are metal detection solutions designed for use in dusty or potentially explosive atmospheres. If operating in a potentially explosive environment, METTLER TOLEDO has options available for Gravity Fall and other metal detection systems where compliance with ATEX / IECEx / Hazloc regulations is required.

Show more
This page is not optimized for your web browser. Consider using a different browser or upgrade your browser to the latest version to ensure the best experience.