Analyzer 2300Na Panel Assy
Early Detection of Trace Sodium.The 2300Na Sodium Analyzer provides early detection of trace sodium contamination in a water system with minimal operator intervention. It is an ideal solution for in-line sodium monitoring in ultrapure water or steam cycle chemistry.
Accurate, Reliable Sodium Monitoring
Combination reference and pH electrode confirms reagent addition for reliable operation, minimizes reagent consumption, and reduces maintenance.
Configurable, Automated Calibration
Unattended, automated calibration ensures the accurate measurement of sodium in your water system and detects breakthroughs right when they occur.
Open Panel Design Reduces Costs
The open panel design reduces costs in areas where additional protection is not required, allowing customers to easily meet budget constraints.
Material No.: 30768009
Features
Sub-PPB Sodium Monitoring at a Glance
The 2300Na Sodium Analyzer delivers more than monitoring at sub-ppb sodium concentration levels. The simultaneous display of temperature, adjusted pH and calibration progress provide a complete picture to increase uptime and reduce operating costs.
Greater Accuracy (Unattended)
The 2300Na Sodium Analyzer eliminates the need for operator intervention with pre-configured, periodic self-calibration. Providing greater measurement accuracy, an internal pH measurement ensures interference-free sodium determination.
Full Lifecycle Value
The 2300Na analyzer delivers measurement accuracy and reliability to exceed your expectations, not your budget. With long, 6-month maintenance intervals you can ensure analyzer uptime with less frequent etching, calibration and lower reagent consumption.
Low Maintenance Made Easy
With 6-month preventive maintenance intervals, the 2300Na Sodium Analyzer requires less downtime and reduces the overall critical operator time commitment. Every calibration automatically results in sensor conditioning, further reducing maintenance requirements.
Specifications
Specifications - Analyzer 2300Na Panel Assy
| Sodium Measurement Range | 0.001 - 100,000 ppb or equivalent ppm, autoranging |
| Sodium Measurement Accuracy | ±10% of reading or ± 0.05 ppb whichever is greater |
| Response Time | 90% at 5 minutes |
| Sample pH | 2.5-12 |
| Update Rate | Once per second |
| Reagent Consumption | Diisopropylamine (DIPA), approximately 1 L per 3 months more at higher temperatures and for cation exchange samples |
| Sample Flow rate | >40 mL/min (>20 mL/min for cation exchange samples), excess to drain |
| Sample Temperature | 5-50°C (41-122°F) |
| Sample Pressure | 0.3-7 bar (5-100 psig) |
| Grab Sample Measurement | Included |
| Power Supply | 100-240 VAC, 50-60 Hz, 25 W, on power loss all settings are retained without batteries |
| Ambient Operating Temperature | 10-45°C (50-113°F) |
| Humidity | 10-90% non-condensing |
| Process Connection | Drain Hose: 19x25.4 mm (3/4 x 1") 2 m (6 ft) length included Sample Inlet: 1/4" or 6 mm OD tube SS compressin fitting Drain Hose: 19x25.4 mm (3/4 x 1") 2 m (6 ft) length included |
| Operator Interface | 4-line backlit LCD, 5 tactile keys simultaneous display of sodium, conditioned pH, auto-cal status (temperature optional) |
| Analog Output | 22mA alarm, 500 ohm max load, not for use with externally powered circuit For sodium, conditioned pH, temperature four powered 0/4-20 mA, |
| Analog Output Scaling | Linear, bi-linear, logarithmic (1,2,3,4 decades), auto ranging |
| Measurement Parameter | Sodium |
| Electrode Conditioning | Part of auto-cal sequence |
| Relay Contacts | 3A resistive freely assignable to setpoints for sodium, pH, temperature other relays used for auto-cal |
| Sodium Calibration | Automatic, unattended 3-point known addition |
| Calibration | Automatic |
| Analog Output Accuracy | ±0.05 mA |
| Model Family | 2300Na |
| EnclosureType | Panel |
| Built-in sequencer | No |
Documentation
Datasheets
The 2300Na Sodium Analyzer delivers more than monitoring at sub-ppb sodium concentration levels. The simultaneous display of temperature, adjusted pH...
