XS3 CC H Checkweigher Combination System

The Hygiene Standard for Highest Demands

While the checkweigher measures product weights quickly and precisely, rejecting "out of tolerance" products, the metal detector reliably detects and rejects products contaminated by metal. Common contaminants detected range from nuts and bolts, right down to small metal filings, staples, needles or pieces of wire. The rejection of "bad" products is ensured by two rejecting devices – a system which allows separate rejection of metal-contaminated and off-weight products.

The checkweighing function is performed using a fully functional and globally proven Garvens XS3 checkweigher. This ensures highly accurate dynamic weight measurement with an accuracy from ±0.2 g.

Product and water build-up is minimised by avoiding level surfaces on the conveyor and weighcell supports, as well as the exclusive use of circular tubes on the horizontal section of the frame. The minimal contact conveyor support clamps and open frame construction facilitate easy cleaning. Seam welding improves hygiene and reduces the risk of bacteria build-up. With the reduced number of support legs, hygienically designed cable runs and an additional "customer's cable" duct, Garvens offer a flexible system specifically to your requirements.

Позвонить специалисту

Specifications -XS3 CC H Checkweigher Combination System

Load cell	EMFR
Accuracy (at 3 Sigma)	from ± 0.2g
Checkweighing range	up to 6000g
Throughput (pcs./minute)	max. 400
Approval	"Weights and Measures" design-approval in certain countries / MID certifiable
Product preset memories	200
Weight classification	up to 7 weight zones plus "metal"
Terminal screen	touchscreen colour display, TFT 15", resolution 1024 x 768 pixel (XVGA)
Standard sorting device	2 pushers
Power	115/230 V (AC), single-phase50/60 Hz, 1kVA

Features and benefits

	A single user interface for both systems The main advantage of the 15" colour touchscreen interface is that both systems are controlled from one central point. This simplifies and speeds up data entry, product changeovers, production quality documentation/statistics and operator training. Its intuitive, clear and easy to understand multilingual menu system has a very high operator acceptance. Reduces operator errors, saves time during product changeover, thereby minimising downtime.
	Large selection of data connection ports All production data and statistical information can be made available in real-time within your local network. Production and quality managers can access and review all relevant data from their desks. Enables rapid response to problems and facilitates preventive measures, thereby minimising downtime.
	Maximum sensitivity The metal detector is available in a variety of pass widths and heights, optimised for maximum detection sensitivity and protection of your products.
	Hygienic design The hygienic open design is in line with extremely strict international food processing regulations. All surfaces are curved and have a fine smooth finish which is perfect for frequent washdowns. Enables quick and easy cleaning.
	SQC/SPC software compatibility Allows installation of a wide range of optional software packages for complete production control, remote access and line optimisation, such as FreeWeigh.Net and ProdX Increases line efficiency and reduces product giveaway.
	Fill machine feedback control option The checkweigher’s control software automatically sends a signal to your filling machine to increase or decrease the fill level, bringing it back to exact target weight. Saves money by reducing product giveaway, increases profitability and prevents consumer disappointment associated with underfilling.