OptiMax Starter Kit and HFCal
Detect Non-Scalable Conditions.The OptiMax 1001 HFCal - A reaction calorimeter for fast and efficient safety studies for process characterization and scale-up.
Uncover Scale-Up and Safety Issues
OptiMax™ HFCal reproducibly delivers information to characterize and scale-up processes ensuring they are safe at scale.
Understand Your Process Parameters
Heat data obtained under both isothermal and non-isothermal conditions enable characterization of process parameters under process-like conditions.
Simple and Accurate Calorimetry
The Plug-and-Play calorimetry module enables determination of heat information accurately and precisely.
رقم المادة: 511628301
سمات
Faster Process Development
Characterize reaction parameters and collect heat information at the same time. The combination of heat information with real-time analytical data provides the scientist with the relevant information for safe scale-up.
Precise Heating and Cooling
The powerful heating and fast cooling combined with the unique control algorithm ensures that the temperature is maintained accurately and precisely between -40 °C and 180 °C, even if sudden exothermic reactions occur.
Accurate Data Analysis
With a single click, iControl software automatically calculates and reports heat transfer data, specific heat of the reaction mass, heat flow and reaction enthalpies.
تحديد
المواصفات - OptiMax Starter Kit and HFCal
| Weight | 35 kg |
| Operating Volume | 150 mL – 1,000 mL |
| Dimensions (HxWxD) | 78 cm x 39 cm x 42 cm |
| Temperature range | -40 °C – 180 °C |
التوثيق
أوراق البيانات
Datasheets for EasyMax and OptiMax HFCal models include technical specifications and configuration options.
منشورات المنتج
View the full catalog of chemical synthesis reactors, workstations, and accessories. Find what you need for your lab!
معلومات المنتج الموسَّعة
Guide on how to operate your OptiMax chemical synthesis workstation.
METTLER TOLEDO provides a range of value-added service options to help ensure instrument uptime, provide quality results, and ensure regulatory compli...
مُكَمِّلات
المواد الاستهلاكية
برمجة
More Information
| Thermostat | ||
| Heating | Electrical | |
| Cooling | Peltier | |
| Cooling Performance | 0°C 35 W 20°C 65 W 40°C 95 W | |
| Temperature Range | -40°C to 180°C (jacket temperature) | |
| Control Modes | isothermal and isoperibolic, constant or ramp, reflux, distillation & crystallization | |
| Stirring | 30 rpm to 1200 rpm | |
| Dimensions | Thermostat: 388 mm x 414 mm x 539 mm | |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz, 1300 VA | |
| Operation | iControl software for calorimetric applications Graphical touchscreen and/or iControl Software | |
| Reactors | ||
| Type | Single piece or two piece (with bottom drain valve) | |
| Volume | 1000 mL | |
| Pressure | 50 mbar to 1 bar | |
| Material | Duran® glass | |
| Stirrer | Pitch-blade (glass, Alloy 22) Anchor (glass, Alloy 22) Half-moon (PTFE for single piece reactor) | |
| Calorimetry | ||
| Type | Heat Flow | |
| Calibration Heater | Max. 20 W | |
| Precision Heat Transfer | Typically ± 3% | |
| Accuracy and Precision Specific Heat | Typically ± 10% | |
| Accuracy Heat Flow | Typically ± 3% to 5%, under isothermal conditions Typically ± 5% to 10%, under non-isothermal conditions | |
| Sensitivity | ≤0.1 W measured as standard deviation of qr under steady state conditions. Peak-to-peak noise is ≤ approximately 0.4 W. | |
| HFCal Module | ||
| Power and Data Interface | Direct connection to CAN interface of standard OptiMax, no additional power supply or PC connection required | |
| Data Logging | Via iControl Software | |
| Dimensions | 120 mm x 40 mm x 170 mm | |
| Software | iControl 5.2 or higher required, HFCal license |