Name: pH 值感測器 InPro2000i/SG/450/9816
Brand: Mettler Toledo

在高要求的應用中可靠運作

InPro2000i可添加式酸鹼值電極使用可加壓的參考電解液，後者能確保隔膜永久自我清潔。如此一來，能在嚴苛的應用裡長期穩定地測量酸鹼值並達到低維護率。

許久後才需再添加電解液

這款可添加式酸鹼值/ORP電極使用9816 Viscolyt電解液。這款電解液的流量受到限制，因此能運作更長一段時間後再重新添加。如此一來，可添加式酸鹼值電極便不需這麼常維護。

符合您的安裝需要

InPro 2000i SG/450/9816擁有整合式數位溫度訊號，能進行可靠的溫度補償。長度450 mm，需要較長的安裝長度時，最適合使用。

準確可靠的測量系統

InPro 2000i的設計，顧及長期的準確性與可靠性。此產品可進行滅菌及高壓滅菌處理，並具備Argenthal銀離子捕捉裝置，以免接面發生硫化物中毒情形，而且通過ATEX及FM認證，可安裝於危險區域。

詳細說明 - pH 值感測器 InPro2000i/SG/450/9816

ISM（數位）或類比	ISM（數位）
pH感測技術	高耐鹼性玻璃薄膜，適用於嚴苛的環境（HA）
酸鹼值範圍	0 – 14
參比系統	可選式與可加壓式電解液、陶瓷隔膜、Argenthal匣盒（搭配銀離子捕捉裝置）
操作溫度(℃)	0 °C - 140 °C
纜線連接器	K8S
可滅菌/可高壓滅菌處	是
電極長度	450 mm
認證與核准	CE METTLER TOLEDO品質證書 FM： IS Cl. I, II, III, Div 1, GR ABCDEFG/T6 ATEX/IECEx： Ex ia IIC T6/T5/T4/T3 Ga/Gb PED
操作壓力（Bar）	0至6 barg
型號系列	InPro2000（i）
溫度感測器	數位
測量參數	pH ORP/氧化還原
電極管柱材質	玻璃
溶液接地/氧化還原金屬	白金
可添加電解質	9816 Viscolyt
危險區域核准	是
主要介質/應用	化學製程
衛生/生物相容性核准	否

Features and Benefits

Reliable in Demanding Applications
The In Pro2000i SG/450/9816 refillable pH sensor uses a pressurizable reference electrolyte that ensures permanent self-cleaning of the diaphragm. This leads to long-term pH measurement stability and low maintenance in harsh applications.

Long Electrolyte Refill Intervals
This refillable pH sensor uses Viscolyt electrolyte. This electrolyte has a limited flow, which means longer operation before refill is needed. This reduces the required regular maintenance of your refillable pH sensor.

Meets Your Installation Requirements
The InPro 2000i SG/450/9816 has an integrated digital temperature signal for reliable temperature compensation. With a 450 mm length, it is optimal when long length installations are needed.

Accurate, Reliable Measurement System
The InPro 2000i is designed with long-term accuracy and reliability in mind. It is sterilizable and autoclavable, has a silver-ion trap to prevent sulfide poisoning of the junction, and is ATEX and FM certified for installation in hazardous areas.

pH值/ORP（氧化還原）探針；氧氣、二氧化碳、臭氣感測器；生物負荷、總有機碳、氣體、鈉、矽與氯化物/硫酸鹽分析儀；傳送器

感測器校準和維護工具

iSense Adaptor Cable DS AK9-RJ12

The DS AK9-RJ12 is a USB cable adaptor for connecting ISM 1-wire sensors to iSense software. This allows pH, DO and CO₂ sensors to be evaluated, maintained and calibrated in the workshop or laboratory.

Diagnostics Away From the Transmitter
The iLink module allows you to access all of the diagnostics of your ISM sensors away from the process with iSense desktop software.

Application Profiling Drives Performance
Store application data on iSense and load directly into an ISM sensor. This allows sensors to learn from preceding sensors in the same process.

Easy Access to Paper Free Documentation
The iLink cable allows sensor calibration and adjustment protocols to be generated automatically in iSense and stored in a fully digital database.

產品編號: 52300383

iLink Multi

A universal device for connecting both 1-wire and RS485 ISM sensors to a computer running iSense software.

產品編號: 30130631