We support and service your measurement equipment through its entire life-cycle, from installation to preventive maintenance and calibration to equipment repair.
Pure Water Transmitters
Transmitters for Water Analytics in Pure Water Systems
Pure water transmitters are analytical transmitters designed for monitoring critical water purity parameters, such as conductivity, total organic carbon, ozone, pH and dissolved oxygen in purified waters or steam cycles. METTLER TOLEDO water transmitters offer an easy-to-use interface, provide calculated measurements and visualization of sensor diagnostics to reduce maintenance efforts. Multi-parameter water transmitters are available to monitor up to 8 measurements at one time.
Clear AllView Results ()
Filter ()
Add 1 or 2 more products to compare
Multi-Channel Water Monitoring Capabilities
Simplify monitoring with METTLER TOLEDO multi-channel water transmitters. Use the same water transmitter to monitor multiple sensors at once, greatly reducing complexity and cost per measurement.
Easy Configuration of Multiple Transmitters
The Transmitter Configuration Tool simplifies setup and configuration by allowing you to create a configuration file on your PC and upload that configuration to multiple water transmitters via USB.
Meet Pure Water Application Requirements
METTLER TOLEDO's pure water transmitters are ideal for analysis across the water purity spectrum, from power generation and pharmaceutical waters to ultrapure water for the semiconductor industry.
Integrate Into Control Systems
A pure water transmitter allows the integration of your measurement data into your water system controller. Integrate with Profinet, Ethernet/IP, Profibus DP or standard 4-20mA outputs.
Improve Maintenance Operations with Unique Diagnostics
METTLER TOLEDO water transmitters offer unique diagnostics such as deionization capacity monitoring, which helps to predict resin exhaustion on a DI system to optimize regeneration timelines.
Multi-Parameter Water Transmitters for a Range of Analytics
Water transmitters integrate with sensors for pH/ORP, resistivity, conductivity, dissolved oxygen, dissolved ozone, TOC, flow and turbidity measurements on pure water systems.
Get Calculated Measurements
In low conductivity waters, pH can be difficult to measure accurately. Multi-channel water controllers from METTLER TOLEDO provide calculated measurements to help ensure accurate pH monitoring.
Useful Related Links
Water Panel Tips: Fast, Error-Free Transmitter Configuration
This video illustrates the typical challenges of configuring multiple transmitters on one or more water panels, with particular focus on the tedious, time-consuming nature of this activity, and its susceptibility to human error. It then introduces the Transmitter Configuration Tool for the METTLER TOLEDO M800, M300 and M200 transmitters, and demonstrates how those problems can quickly and easily be solved. Watch the Video now. Read more
Deionization Resin Capacity and Exhaustion Monitoring for Water Cycle Chemistry
METTLER TOLEDO offers another solution for deionization capacity monitoring. The M800 multi-parameter transmitter with DI-Cap deionization capacity monitoring uses UniCond conductivity sensors and flow rate measurements to help provide a reliable measurement of the remaining resin capacity. Watch the Video now. Read more
Deionization Capacity Monitoring
Download the white paper, "Deionization Capacity Monitoring Reduces Water Treatment Costs," to learn about a proactive approach for predicting when resin exhaustion will occur that offers significant benefits over the traditional elapsed time and totalized flow methods. Read more
Process Analytics Catalog
The Process Analytics Catalog provides a comprehensive overview of solutions for analytical measurements in liquid process applications, pure water monitoring and gas-phase measurement. Parameters covered include pH, dissolved oxygen, dissolved CO2, conductivity, turbidity, and total organic carbon. Read more
Optimize Transmitter Installation with an Easy Tool
Extremely convenient transmitter configuration tool software enables instrument setup to be completed on a PC and then downloaded into the instrument. This can save many hours pushing buttons, especially when configurations are duplicated on multiple transmitters or multiple systems. The software also provides secure backup configuration for the end-user on site. Read more
+44 116 234 0484
Call Service Explore our Services - Tailored to Fit your Equipment
Remote Support
Fast intervention and full security with our remote support capabilities.
- On-Site Customer with Mobile Device
- Remote Technician on Computer
Uptime
Support & Repair
Support & Repair
Performance
Maintenance & Optimization
Maintenance & Optimization
Compliance
Calibration & Quality
Calibration & Quality
Expertise
Training & Consulting
Training & Consulting
FAQs
What is a pure water transmitter?
Pure water transmitters are a critical component of measuring water quality to ensure the control of corrosion and deposition throughout water systems to provide a safe working environment, as well as the longevity of plant equipment. METTLER TOLEDO pure water transmitters measure the purity level of water from a sensor and further communicates that data back to the user or higher level system in a clear and concise manner.
What measuring parameters are covered by METTLER TOLEDO pure water transmitters?
METTLER TOLEDO offers a range of multi-channel water transmitters that cover critical parameters for water analytics, including measurement of pH/ORP, resistivity, conductivity, dissolved oxygen, dissolved ozone, optical DO, amperometric oxygen, TOC, flow and turbidity measurements of pure water.
How can I make configuring transmitters less time consuming?
All METTLER TOLEDO pure water transmitters feature Transmitter Configuration Tool (TCT) software that diminishes the typically complex, time-consuming and frustrating process of configuring multiple transmitters. TCT is a PC-based program that allows users to efficiently pre-configure a transmitter on their PC or laptop and within seconds upload that file to multiple transmitters. Users can also configure transmitters at the transmitter itself, or at a desktop outside the work environment by using the provided USB port.
Can pure water transmitters measure multiple parameters at one time?
Yes, there are water transmitters that measure multiple parameters at the same time. These are called multi-parameter, multi-channel water transmitters. This category of water transmitters is optimal for situations where multiple parameters need to be measured. A multi-channel water transmitter can also be used when you need a redundant measurement for compliance purposes. Some multi-parameter water transmitters can also provide calculated measurements, such as calculated pH based on conductivity. Water transmitters in the METTLER TOLEDO portfolio can display up to eight measurements at a time.