Transmitter M100 2XH M20 - Discontinued Product
Discontinued since: Jan, 2022
Small Footprint for Hazardous Areas.The M100 HM is a single-channel, multi-parameter transmitter that is mounted directly over the sensor electronics via an M20 connection. It's compatible with pH/ORP, pH/pNa, oxygen, and conductivity sensors and supports HART communication.
Designed for Challenging Environments
The M100 is an explosion proof/flameproof transmitter with intrinsically-safe electronics, providing accurate measurement in hazardous environments.
Predictive Maintenance
Access to ISM predictive diagnostic tools available over HART leads to reduced maintenance and increased process uptime.
Plug & Measure Operation
With iSense software, sensors can be calibrated via a PC or mobile device, then connected to the M100 without the need to recalibrate.
Material No.: 30026578
Features
Intrinsically Safe Design
The M100 HM is designed to be mounted directly to the sensor. The stainless steel housing is explosion proof/flameproof and the electronics are intrinsically safe, providing a safe, accurate measurement.
Integration & Control via HART
The transmitter configuration and integration of sensor diagnostics into asset management tools is possible thanks to the integrated HART protocol. This ensures maximum compatibility and easy integration.
Small Footprint
The M100 HM is mounted directly on the head of the sensor, and has neither a local display nor operator interface. This allows for a compact measurement point that can be installed in both hazardous and non-hazardous areas.
Specifications
Specifications - Transmitter M100 2XH M20
| Parameter(s) | pH Conductivity Dissolved Oxygen ORP |
| Sensor Type | ISM |
| Current Output(s) Digital Output | 1 x 0/4-20mA |
| Analog Inputs | 1 |
| Inputs (2) | 1 |
| Communication | HART |
| Hazardous Area Approvals | Yes |
| Approvals and Certificates | NEPSI Ex Zone 1 cCSAus Cl.I Div.1 ATEX / IECEx Zone 1 CE compliant |
| Wired Mode | 2-Wire |
| Power Supply | 14-30 VDC |
| User Interface | None |
| Relay Contact(s) | None |
| PID Controller | None |
| Channels | 1 |
| Enclosure Material | Stainless Steel |
| Protection Rating | IP66 |
| USB Interface | No |
| Size | Sensor Mount |
| Primary Media/Application | Chemical Processes Other Industrial Processes |
| Model Family | M100 |
Intrinsically Safe Design
The M100 HM is designed to be mounted directly to the sensor. The stainless steel housing is explosion proof/flameproof and the electronics are intrinsically safe, providing a safe, accurate measurement.
Integration & Control via HART
The transmitter configuration and integration of sensor diagnostics into asset management tools is possible thanks to the integrated HART protocol. This ensures maximum compatibility and easy integration.
Small Footprint
The M100 HM is mounted directly on the head of the sensor, and has neither a local display or operator interface. This provides for a compact measurement point that can be installed in hazardous or non-hazardous areas.
Documentation
Datasheets & Brochures
Head mount transmitter, small footprint – big possibilities.
DIN Rail transmitter, high performance and minimal space requirement.
The M100 Sensor Mount (SM) is a single-channel transmitter. It allows the connection on biocontrollers of 1-wire ISM sensors for measuring pH, ampDO a...
Small footprint installation for hazardous areas
The M100 DR DIN rail transmitter is a 2-wire transmitter with HART® communication capability for analytical measurements. The M100 DR is a single-chan...
Instruction Manuals
These operating instructions offer important notes on handling of the M100 transmitter of METTLER TOLEDO. A prerequisite for safe work is compliance w...
These operating instructions offer important notes on handling of the M100 DR transmitter of METTLER TOLEDO. A prerequisite for safe work is complianc...
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits ar...
Quick Setup Guides
The M100 is a 2-wire head mount transmitter for analytical measurements with HART communication capabilities. The M100 is a single-channel, multi-para...
The M100 DIN rail transmitter is a 2-wire transmitter for analytical measurements with HART communication capabilities. The M100 is a single-channel,...