Balances or scales should always be checked with reference weights that you can rely on and trust. Our accredited mass laboratories clean, calibrate and adjust your weights, then document the results in calibration certificates with details of conventional mass correction, uncertainty and traceability information according to ISO/IEC 17025.
Grip Handle Test Weights / 1 kg to 50 kg
Wide Range of Weights for Industrial Applications
Grip handle test weights are industrial weights for testing scales with maximum capacities up to 200 kg. These weights are designed for easy handling and long-term stability for routine testing of your weighing equipment. Choose from painted cast iron, high glossy stainless steel or fine-ground stainless steel depending on your weighing environment.
Clear AllView Results ()
Filter ()
Add 1 or 2 more products to compare
Useful Related Links
How to Select the Correct Test Weight and Weight Class
The selection of test weights depends on the degree of accuracy needed to satisfy your specific process tolerance. Our free GWP® Recommendation service specifies the correct test weights and weight class to use to check the performance of your weighing device. Read more
Weight-Handling Accessories
Ergonomic tweezers and weight forks as well as clean-room gloves and cleaning cloths meet the highest requirements of all industries and ensure professional weight handling. Read more
Weight Calibration Service
Accredited calibration laboratories around the world clean, calibrate and adjust weights and then document the results in a calibration certificate. With our global network of accredited mass calibration laboratories, you can be sure of trustworthy calibration services and benefit from short weight-recalibration times. Read more
Verifying and Maintaining Accuracy Over Time
GWP® Verification assesses if the measured performance of your balance or scale satisfies your specific process and quality requirements. It documents the measurement range in which you can operate your equipment to achieve accurate and reproducible results. If a device does not achieve target performance, GWP® Verification recommends immediate measures to recover its accuracy. Read more
Service Offering
Calibrating, Passion at Work
Our unmatched global network of 14 calibration laboratories across Europe, the Americas and Asia guarantee fast and cost-effective mass calibration. Our metrology staff are passionate about their calibration work, to ensure you receive first class service as well as continuously improved results.
Using State-of-the-Art Robotic Mass Comparators
The combination of robotic technology and world-class mass comparators delivers proven reliability and outstanding measurement performance.
Scope up to 5 t
Scopes range from OIML E to M classes and ASTM classes. For heavy-duty weights, services cover all steps from re-painting to calibration, even for weights up to 5 t.
Professional Weight Cleaning
Weights up to 50 kg undergo treatment in a total of six separate customized baths. Each weight is cleaned and stabilized in a fully automated process prior to calibration to ensure uniform surface conditions.
Uptime
Support & Repair
Support & Repair
Performance
Maintenance & Optimization
Maintenance & Optimization
Compliance
Calibration & Quality
Calibration & Quality
Expertise
Training & Consulting
Training & Consulting
Professional Installation - Get it right from the start
FAQ
What are grip handle weights used for?
Grip handle test weights are used for the routine testing and calibration of scales with maximum capacities up to 200 kg. This helps manufacturers to achieve regulatory compliance and ensure the highest accuracy of their weighing equipment.
Do grip handle weights need to be calibrated? How often should grip handle test weights be calibrated?
Depending on how often the grip handle test weights are in use, they should be re-calibrated every 1-2 years. METTLER TOLEDO has calibration laboratories around the world to support you with this. Contact local representative for support.
What are the types of grip handle weights?
METTLER TOLEDO offers a variety of grip handle test weights including F1 high-glossy stainless steel for the most demanding requirements in regulated industries, M1 fine-ground stainless steel for harsh environmental conditions, and painted cast iron for an economical solution in general industrial applications. They can also be rectangular or cylindrical in shape.