Titration-IC systems provide fast, accurate determinations of sample pH, conductivity, total acidity/alkalinity, with IC analysis of standard anions and cations, total hardness (based on Mg²⁺ and Ca²⁺ amounts) and total ion balance. IC analysis is performed simultaneously with titration for a completed analytical procedure, typically in 20 minutes. Thermo Scientific Dionex Chromeleon Software integrates all results into a single convenient report.

The fully automated system is designed to measure sample conductivity and determine the best sample injection volume for ion chromatography analysis. Automated standards dilution, implemented using the capability of the METTLER TOLEDO Rondo auto sampler and Liquid Handler removes the need for manual standards dilutions.

Properties and Concentrations Determined:

Features:

• Fully integrated, automated analysis station – Thermo Scientific Dionex Chromeleon Software is the one and only control interface for all determinations providing less operation and result transcription errors and fast operator training
• Reliable sample and liquid handling for large sample series - Sample cross contamination is avoided thanks to air bubble separated rinsing of IC tubes and the Rondo PowerShower™ rinse mechanism ensures no cross contamination on the Rondo30 sample changer
• Automatic selection of the correct sample loop size for IC – Automatic IC sample loop selection (large or small) based off conductivity reading for optimal IC accuracy
• Automated dilution of IC standards (anions and cations) – The Liquid Handler provides accurate and repeatable standard dilution for a fully automated IC calibration with just One Click^®
• Automated test routine of sensors – Monitored sensor performance for checks and maintenance prompts
• Integratedreporting - One report including all direct sensor measurements, titration, chromatography, and ion balance in Dionex Chromeleon Software
• Extended IC Data Management Software - Result plausibility check, audit trail, control charts and data export capabilities
• RFIC-ER (Reagent-Free™ Ion Chromatography-Eluent Regeneration) - RFIC-ER systems reduce the manual labor of IC to a minimum with regenerated eluents that can last up to 4 weeks leaving you more time for your analyses
• Global Solution – Represented globally, know you are working with two established instrument manufacturers, Thermo Fisher Scientific and METTLER TOLEDO for harmonized installation and support