
The GPro® 500 oxygen gas analyzer is a unique tunable diode laser spectrometer designed for safety applications. It uses a folded-path laser beam design for simple installation and measurement.
Fast Response In Safety Applications
An oxygen gas analyzer for safety applications, the GPro 500 provides a fast response time in combustion control and inerting applications.
Low Maintenance and Operating Costs
This oxygen gas analyzer is designed to operate in situ without a maintenance-prone conditioning system, reducing the total cost of ownership.
Easy Installation
The GPro 500 is an alignment-free TDL gas analyzer, meaning that the typical challenges of TDL installation and alignment are significantly reduced.
Gas Measured | Oxygen |
Lower Detection Limit | 100 ppm-v |
Measurement range | 0-100% |
Accuracy | 1% of reading or 100ppm O₂, whichever is greater |
Linearity | Better than 1% |
Resolution | <0…01% vol O₂ (100ppm-v) |
Drift | Negligible (<2% of measurement range between maintenace intervals) |
Sampling rate | 1 second |
Response time (T90) | O₂ in N₂ 21%>0% in <2 seconds |
Repeatability | ± 0.25% of reading or 0.05% O₂ (whichever is greater) |
Process pressure range | 0.8 bar - 5 bar (abs)/11.6 psi - 72.52 psi (abs) |
Process temperature range | 0-250°C (23-482°F); Optional(for probe installation)<br> 0-600°C (0-1112°F) with additional thermal barrier |
Effective path length | 50mm - 10m, depending on adaption |
Process Adaption or Sensor | Sensor |