ISM pH Sensors

ISM pH Sensors

Digital ISM pH Probes for Process & Water Applications

ISM™ pH sensors are digital pH sensors that provide a reliable, pH measurement signal for in-line measurement applications. METTLER TOLEDO's Intelligent Sensor Management (ISM) pH probes use a digital pH measurement technology to ensure an interference-free measurement. ISM pH sensors provide predictive diagnostics to improve maintenance operations, simplify and speed up calibration and measurement point commissioning, and improve sensor inventory management.

Call for Quote
Full Calibration History

Full Calibration History (up to 100) Saved in Sensor

ISM pH/ORP sensors can save up to 100 calibrations, plus user ID, device ID, device firmware, and device serial number. This provides gapless and manipulation-proof traceability of all field, process and lab calibrations, and can be printed out using ISM Core software.

Internal Temperature Sensor Calibration

Internal Temperature Sensor Calibration

The internal temperature sensor of ISM pH/ORP sensors can be calibrated. There is no need to change SOPs that require a temperature calibration.

Enhanced Sensor Diagnostics​

Enhanced Sensor Diagnostics​

ISM pH/ORP sensors can detect glass breakage up to 80 °C. The SIP and CIP counters can be configured for each specific process to accurately detect SIP and CIP cycles. ISM transmitters and ISM Core software can detect an insufficient calibration and advise for recalibration.

Safe and Robust Sensor Operation

Safe and Robust Sensor Operation

ISM pH/ORP sensors provide error-free sensor health monitoring in high temperature applications and react immediately to measurement deviations and sensor condition.

Long-term Accuracy

Long-term Accuracy, Low Offset and Drift

ISM pH/ORP sensors are designed with features that allow them to better endure challenging process environments. 

Robust Digital Measurement Signal

Robust Digital Measurement Signal

ISM sensors convert the measurement from a sensitive analog signal to a robust digital signal directly in the sensor. The measurement value is transmitted digitally and is unaffected by interference or degradation caused by long cable lengths, nearby equipment or moisture.

ISM Predictive Diagnostics

ISM Predictive Diagnostics

The built-in predictive diagnostics of ISM sensors learns from past and present data to predict exactly in days remaining as to when a sensor will need to be calibrated or replaced. ISM predictive maintenance data are calculated inside the sensors and are transferable to any process control and asset management platform.

View Results ()
Filter ()

Add 1 or 2 more products to compare
+34900922550
Call Service
Performance
Maintenance & Optimization
Compliance
Calibration & Quality
Expertise
Training & Consulting

FAQs

What is an ISM ph sensor?

An ISM ph sensors is a type of digital ph sensor that includes an electronic chip in the sensor head, which converts the measurement data into a digital signal before the signal leaves the sensor. This creates a signal that is very robust and not affected by interference. ISM ph sensors offer significant benefits over traditional analog ph sensors because more data can be sent in a digital signal than an analog signal. This enables the ISM sensor to provide diagnostics, which maximizes the efficiency of the sensor. It also allows the ISM ph sensor to store calibration relevant data and a label for the measurement point. 

METTLER TOLEDO's digital ph sensor technology is called Intelligent Sensor Management (ISM). Most models of METTLER TOLEDO digital ph sensor end with the letter "i".

What does ISM stand for?

ISM stands for Intelligent Sensor Management. This is the name of METTLER TOLEDO's digital sensor technology. Most models of METTLER TOLEDO ISM ph sensors end with the letter "i".

What diagnostics are available on an ISM pH sensor?

METTLER TOLEDO ISM ph sensors offer a variety of predictive diagnostics that are designed to improve your maintenance and sensor replacement operations and reduce the risk for sensor failure. These include:

Dynamic Lifetime Indicator (DLI): Indicates to the user how many days remain until the sensor will need to be replaced. Unlike typical "counter-style" diagnostics, the DLI adjusts based on the conditions that the sensor is operating under. Proper maintenance can significantly extend the lifetime of sensors. 

Adaptive Calibration Timer (ACT): Tells the user how long until a sensor will need calibrated, based on the current measurement conditions. This is beneficial for switching from a periodic calibration scheme to a predictive calibration scheme, where you only calibrate your sensor when needed.

What is Plug and Measure technology?

Plug and Measure is a technology on ISM ph sensors and other ISM sensors that enables faster startup and commissioning of a measurement point, and faster replacement of ISM ph sensors. Because these ISM ph sensors can store calibration relevant data on a chip in the sensor head, the sensor can be calibrated away from the process by using iSense software. A pre-calibrated ISM sensor can then be quickly put directly into the process without the need for another calibration at the measurement point. This is particularly beneficial at challenging measurement points or in hazardous or dangerous areas.

What is ISM Core software?

ISM Core is a software for METTLER TOLEDO ISM pH probes that dramatically simplifies calibration, maintenance and documentation. Using ISM Core software, you can calibrate intelligent ph sensors in a convenient location away from the process, automatically generate calibration reports, access all predictive diagnostics and counters (such as SIP or Autoclave counters), and assign sensors to their location for easy management of your entire ISM ph sensor inventory. This software also works with METTLER TOLEDO ISM digital dissolved oxygen sensors and digital CO2 sensors.