Wij ondersteunen en onderhouden uw meetapparatuur gedurende het gehele productleven, van installatie tot preventief onderhoud en van kalibratie tot reparatie.
M100 Compact Transmitters
Sensor-Mounted and DIN Rail-Mounted Analytical Transmitters
The M100 is a family of single-channel, multi-parameter transmitters with a compact footprint to simplify installation. This family includes the M100 sensor mount transmitter for bioreactors and the M100 DIN rail transmitter for simple, compact installation. To maximize space, M100 has no on-screen interface. Sensor configuration and viewing of diagnostics are done externally via a PC with iSense software or your plant controller. LEDs on the transmitter display sensor status and alarms.
Wis alleView Results ()
Filter ()
Voeg 1 of 2 andere producten toe om te vergelijken
Smallest Footprint for Simplified Installation
The M100 transmitters offer an extremely compact footprint. Either installed directly on the sensor or on a DIN rail, they are optimal for processes where space is limited.
Easily Communicate with the M100 DIN Rail
The M100 multi-parameter DIN Rail transmitter has integrated HART protocol as standard and communicates with major asset management tools, including AMS, PDM and PACTware.
Full Use of ISM Benefits with the M100
The M100 transmitter allows you to take advantage of ISM diagnostics and the Plug and Measure capability. The diagnostics indicate when the connected sensor needs calibrated or replaced.
Simple Plug and Measure Operation
iSense software enables users to calibrate their sensors via a PC and then connect to an M100 transmitter to speed up measurement point commissioning and allow a hot swap of sensors.
Predictive Diagnostics Simplify Maintenance
Advanced sensor diagnostics are available over HART on the M100 DIN rail transmitter or over Bluetooth, Modbus RTU or analog interfaces on the M100 sensor-mount transmitter.
Upgrade Bioreactors to Digital
The M100 sensor-mount transmitters are designed for bioreactors. They allow you to easily integrate digital ISM pH, dissolved oxygen and CO2 sensors directly into the head plate of a bioreactor.
Gerelateerde informatie
Data Sheets for Sensor Mount Transmitter M100 SM
The M100 Sensor Mount (SM) is a single-channel transmitter. It allows the connection on biocontrollers of 1-wire ISM sensors for measuring pH, ampDO and CO2 or ISM RS485 optical oxygen sensors. Lees meer
Family Flyer of Intelligent Transmitter Series
METTLER TOLEDO provides tailorable transmitter solutions to meet the requirements of a wide range of applications. The transmitter series cover pH / ORP, oxygen, dissolved carbon dioxide and conductivity measurements. Lees meer
Data Sheet for M100 DIN Rail Transmitter
The M100 DR is a single-channel, multi-parameter transmitter compatible with ISM 1-wire sensors for measuring pH/ORP, pH/pNa, oxygen and conductivity. Lees meer
Quick Setup Guide Transmitter M100
The M100 transmitter must only be installed, connected, commissioned, and maintained by qualified specialists e.g. electrical technicians in full compliance with the instructions in this Quick Setup Guide, the applicable norms and legal regulations. Lees meer
Instruction Manuals for Sensor Mount Transmitter M100
The M100 SM is a direct mount transmitter for METTLER TOLEDO ISM® sensors (1-wire sensors or RS485 digital output sensors) for use with analog or digital biocontrollers. Lees meer
+32 3 250 15 70
Bel Service Ontdek onze services – geheel afgestemd op uw apparatuur
Uptime
Ondersteuning & Reparatie
Ondersteuning & Reparatie
Performance
Onderhoud & Optimalisatie
Onderhoud & Optimalisatie
Compliance
Kalibratie & Kwaliteit
Kalibratie & Kwaliteit
Expertise
Training & Consulting
Training & Consulting
FAQs
What is an M100?
An M100 is family of single-channel, multi-parameter analytical transmitters The M100 DR (DIN Rail transmitter) can be used for measuring for measuring pH/ORP, dissolved oxygen and conductivity, while the M100 SM (Sensor Mount transmitter) can be used for measuring pH/ORP, dissolved oxygen or CO2. They are designed for METTLER TOLEDO Intelligent Sensor Management (ISM) digital sensors.
How is an M100 mounted?
There are different configurations of M100 transmitter. The DIN rail transmitter is an M100 that is suitable for DIN rail mounting on a 35 mm wide DIN rail system. The M100 sensor-mount transmitter is mounted directly on the head of the sensor via an AK8 or VP8 connection, depending on the model.
How do I configure an M100 if it has no display?
This depends on the configuration of your M100 transmitter. For the M100 DIN rail transmitter, the configuration and integration of sensor diagnostics into asset management tools is possible thanks to the integrated HART protocol or 4/20mA analog output. For the M100 sensor-mount transmitter, there is a Bluetooth 4.0 interface as well as two 4/20 mA analog outputs and a digital MODBUS RTU interface.
What ISM features are available on the M100?
The M100 family of analog transmitters allows you to take advantage of all of the features of ISM technology. ISM sensors integrated into an M100 transmitter feature Plug and Measure functionality for fast, easy set-up. Users also have access to ISM predictive diagnostics, including the Dynamic Lifetime Indicator and the Adaptive Calibration Timer.