Ammonia and Water Gas Analyzer: GPro 500
Tunable Diode Laser for NH₃ ppm & H₂O% Measurement
The GPro 500 ammonia and water gas analyzer is a unique TDL spectrometer designed for direct measurement of ammonia in stack measurement and ammonia slip applications. It uses a folded-path laser beam design for low maintenance, accurate measurement.
Top Performance in Ammonia and Water Measurement
An NH3 & H2O analyzer for challenging applications, the GPro 500 provides reliable measurement in ammonia slip and stack measurement applications.
Low Maintenance and Operating Costs
This ammonia and water gas analyzer is designed to operate in situ without a maintenance-prone conditioning system, reducing the total cost of ownership.
Easy Installation
The GPro 500 is an alignment-free TDL gas analyzer, meaning that the typical challenges of TDL installation and alignment are significantly reduced.
Specifications
Specifications - Ammonia and Water Gas Analyzer: GPro 500
| Gas Measured | Ammonia and Water (NH₃ & H₂O ) |
| Lower Detection Limit | 0.4 ppm-v (NH₃)¹⁾ ;1 ppm-v (NH₃ at 400°1C with H₂O concentration equal or lower than 40%) 600 ppm (H₂O) |
| Measurement range | 0 – 1%(NH₃) ; 0 – 40% (H₂O) |
| Accuracy | 2% of reading or ±0.4 ppm, whichever is greater (NH₃)¹⁾; ±1 ppm-v (NH₃ at 400°C with H₂O concentration equal or lower than 40%) 5% of reading or ±600 ppm, whichever is greater (H₂O) |
| Linearity | Better than 1% |
| Resolution | 0.1 ppm-v (NH₃) ; 1000 ppm (H₂O) |
| Drift | Negligible (<2% of measurement range between maintenance intervals) |
| Sampling rate | 2 seconds |
| Response time (T90) | NH₃ in N₂ 1% to 0% in < 10 sec |
| Repeatability | 2% of reading or 0.4 ppm, whichever is greater (NH₃) ; 5% of reading or 600 ppm, whichever is greater (H₂O) |
| Process pressure range | 0.8 bar – 3 bar (abs) / 11.6 psi -43 psi (abs) |
| Process temperature range | 0-250 °C (32-482 °F) standard; 0-600 °C (32– 1112 °F) with additional thermal barrier 0-150 °C (32-302° F) with PFA or PTFE filter |
| Effective path length | 50 mm – 800 mm, depending on adaption |
| Process Adaption or Sensor | Sensor |
Features and Benefits
| Designed for Challenging Installations The GPro 500 is configurable, enabling the ammonia gas analyzer's measurement system to be paired with a variety of process adaptions to meet a wide range of installation requirements, including pipe diameters from 50 mm to over a meter. |  |
Meets Process Control Needs This NH3 gas analyzer is ideal for process control in ammonia slip applications. The GPro 500 ammonia gas analyzer is a tunable diode laser gas analyzer that offers precise, reliable and fast measurement in critical applications, and is SIL 2 compatible. | |
Immediate, In Situ Measurement The GPro 500 NH3 gas analyzer is installed in situ, so you get a quick response without the need to condition a sample. This offers a reliable and cost-effective alternative to technologies that require maintenance-prone extraction and conditioning systems. | |
Documentation
Brochures
Plant safety, product quality, high productivity: that’s what’s most important to you. And that’s why our approach to designing gas analyzers and sens...
Datasheets
An NH3 and H2O analyzer for challenging applications, the GPro 500 provides reliable analysis in ammonia slip and stack measurement applications.
Technical Specifications
White Papers
This white paper looks at five issues around process gas analyzers and how tunable diode laser (TDL) spectrometers circumvent them.
Case Studies
These highly reliable gas analyzers are designed to provide fast response times for a variety of gases in industrial and chemical processes. Both tuna...
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters
Application Notes
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters
Software
MT-TDL-Suite-V6_8_6_w_RT-2022-06-09 (zip - 200 MB)
