OptiMax Starter Kit and HFCal
N. di materiale: 511628301
Specifiche
Specifiche - OptiMax Starter Kit and HFCal
| Peso | 35 kg |
| Volume operativo | 150 mL – 1.000 mL |
| Dimensioni (AxLxP) | 78 cm x 39 cm x 42 cm |
| Intervallo di temperatura | -40 °C – 180 °C |
| Luce anteriore / posteriore | Sì / Sì |
| Precisione del passaggio di calore | Typically +/- 3% |
| Precisione e accuratezza del calore specifico | Typically +/-10% |
| Accuratezza del flusso di calore | Basato sul confronto di qr_hf con qc risp. ∫qr_hf con ∫ qc Condizioni isotermiche: da ±3% a 5% Condizioni non isotermiche: da ±5% a 10% |
| Tipo calorimetria | Flusso di calore |
| Materiale | OptiMax Starter Kit (51162830) and Upgrade Kit OptiMax HFCal (30050150) |
| Modi temperatura | Controllo camicia, controllo miscela di reazione, controllo distillazione, controllo cristallizzazione |
| Riscaldamento / Raffreddamento | Termostato a stato solido |
| Requisiti di alimentazione | 100–240 V CA, 50/60 Hz |
Documenti
Schede tecniche
Datasheets for EasyMax and OptiMax HFCal models include technical specifications and configuration options.
Brochures Prodotto
View the full catalog of chemical synthesis reactors, workstations, and accessories. Find what you need for your lab!
Informazione Prodotto estesa
Guide on how to operate your OptiMax chemical synthesis workstation.
METTLER TOLEDO provides a range of value-added service options to help ensure instrument uptime, provide quality results, and ensure regulatory compli...
Accessori
Consumabili
Software
More Information
| Thermostat | ||
| Heating | Electrical | |
| Cooling | Peltier | |
| Cooling Performance | 0°C 35 W 20°C 65 W 40°C 95 W | |
| Temperature Range | -40°C to 180°C (jacket temperature) | |
| Control Modes | isothermal and isoperibolic, constant or ramp, reflux, distillation & crystallization | |
| Stirring | 30 rpm to 1200 rpm | |
| Dimensions | Thermostat: 388 mm x 414 mm x 539 mm | |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz, 1300 VA | |
| Operation | iControl software for calorimetric applications Graphical touchscreen and/or iControl Software | |
| Reactors | ||
| Type | Single piece or two piece (with bottom drain valve) | |
| Volume | 1000 mL | |
| Pressure | 50 mbar to 1 bar | |
| Material | Duran® glass | |
| Stirrer | Pitch-blade (glass, Alloy 22) Anchor (glass, Alloy 22) Half-moon (PTFE for single piece reactor) | |
| Calorimetry | ||
| Type | Heat Flow | |
| Calibration Heater | Max. 20 W | |
| Precision Heat Transfer | Typically ± 3% | |
| Accuracy and Precision Specific Heat | Typically ± 10% | |
| Accuracy Heat Flow | Typically ± 3% to 5%, under isothermal conditions Typically ± 5% to 10%, under non-isothermal conditions | |
| Sensitivity | ≤0.1 W measured as standard deviation of qr under steady state conditions. Peak-to-peak noise is ≤ approximately 0.4 W. | |
| HFCal Module | ||
| Power and Data Interface | Direct connection to CAN interface of standard OptiMax, no additional power supply or PC connection required | |
| Data Logging | Via iControl Software | |
| Dimensions | 120 mm x 40 mm x 170 mm | |
| Software | iControl 5.2 or higher required, HFCal license |