OptiMax Starter Kit and HFCal
Artikelnummer: 511628301
Specificaties
Specificaties - OptiMax Starter Kit and HFCal
| Gewicht | 35 kg |
| Bedrijfsvolume | 150 mL – 1.000 mL |
| Afmetingen (HxBxD) | 78 cm x 39 cm x 42 cm |
| Temperatuurbereik | -40 °C – 180 °C |
| Verlichting voor/achter | Ja/Ja |
| Precisie warmteoverdracht | Typisch +/- 3% |
| Nauwkeurigheid en precisie specifieke warmte | Typisch +/- 10% |
| Nauwkeurigheid warmtestroom | +/- 3% to 5% +/- 5% tot 10% qr_hf |
| Type calorimetrie | Heat Flow |
| Materiaal | OptiMax Starter Kit (51162830) and Upgrade Kit OptiMax HFCal (30050150) |
| Temperatuurstanden | Mantelcontrole, reactiemengselcontrole, distillatiecontrole, kristallisatiecontrole |
| Verwarming/koeling | Halfgeleiderthermostaat |
| Voedingsvereisten | 100-240 V AC, 50/60 Hz |
Documentatie
Gegevensbladen
Datasheets for EasyMax and OptiMax HFCal models include technical specifications and configuration options.
Productbrochure
View the full catalog of chemical synthesis reactors, workstations, and accessories. Find what you need for your lab!
Uitgebreide productinformatie
Guide on how to operate your OptiMax chemical synthesis workstation.
METTLER TOLEDO provides a range of value-added service options to help ensure instrument uptime, provide quality results, and ensure regulatory compli...
Accessoires
Verbruiksartikelen
Software
More Information
| Thermostat | ||
| Heating | Electrical | |
| Cooling | Peltier | |
| Cooling Performance | 0°C 35 W 20°C 65 W 40°C 95 W | |
| Temperature Range | -40°C to 180°C (jacket temperature) | |
| Control Modes | isothermal and isoperibolic, constant or ramp, reflux, distillation & crystallization | |
| Stirring | 30 rpm to 1200 rpm | |
| Dimensions | Thermostat: 388 mm x 414 mm x 539 mm | |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz, 1300 VA | |
| Operation | iControl software for calorimetric applications Graphical touchscreen and/or iControl Software | |
| Reactors | ||
| Type | Single piece or two piece (with bottom drain valve) | |
| Volume | 1000 mL | |
| Pressure | 50 mbar to 1 bar | |
| Material | Duran® glass | |
| Stirrer | Pitch-blade (glass, Alloy 22) Anchor (glass, Alloy 22) Half-moon (PTFE for single piece reactor) | |
| Calorimetry | ||
| Type | Heat Flow | |
| Calibration Heater | Max. 20 W | |
| Precision Heat Transfer | Typically ± 3% | |
| Accuracy and Precision Specific Heat | Typically ± 10% | |
| Accuracy Heat Flow | Typically ± 3% to 5%, under isothermal conditions Typically ± 5% to 10%, under non-isothermal conditions | |
| Sensitivity | ≤0.1 W measured as standard deviation of qr under steady state conditions. Peak-to-peak noise is ≤ approximately 0.4 W. | |
| HFCal Module | ||
| Power and Data Interface | Direct connection to CAN interface of standard OptiMax, no additional power supply or PC connection required | |
| Data Logging | Via iControl Software | |
| Dimensions | 120 mm x 40 mm x 170 mm | |
| Software | iControl 5.2 or higher required, HFCal license |