Cond Sensor InPro7005-VP
Accurate Measurement of Water Purity.The InPro 7005-VP is a 2-electrode conductivity sensor designed for high accuracy measurement in very low to medium conductivity water.
Meets Chemical Industry Needs
This sensor is available in commonly-used process connections that meet chemical application needs with conductivity values up to max. 10mS/cm.
Highly Accurate and Cost Effective
The conductivity sensor is highly accurate, due to its NIST/ASTM-traceable cell constant and is extremely cost-effective thanks to its 2-electrode sensor design.
Wide Measuring Range
WideRange technology enables an almost universal use of this sensor, from ultrapure water to drinking water and salt solutions.
Material No.: 52001996
Features
Process Reliability and Easy Connection
The IP68 rated VarioPin connector system ensures excellent signal transmission and avoids problems associated with humidity.
Easy Process Installation
The InPro 7000-VP conductivity sensor can simply be screwed into a pipe-tee via the 3/4" NPT thread and is immediately available to use.
Improved Process Safety
The sensor provides both improved process safety and enhanced support for validation and qualification procedures.
Specifications
Specifications - Cond Sensor InPro7005-VP
| Temperature Sensor | PT 1000 |
| Cell Constant | 0.1 cm-1 |
| Cable Connection | Vario Pin (IP 68) |
| Cell Constant (nominal) | 0.1 cm–1 |
| Measurement Technology | Conductive |
| Process Connection | ¾ NPT |
| Sterilizable | No |
| Operating Temperature (Fahrenheit) | 14...212 °F |
| O-Ring Material | Viton® (FDA) |
| Operating Temperature (Celsius) | -10...100 °C |
| Mechanical Pressure Resistance (PSI) | 250 psi (77 °F), 100 psi (203 °F) |
| Model Family | 2-electrode sensor |
| Hazardous Area Approvals | Yes |
| Measured Pressure Resistance | 0 – 100 psig @ 203 °F 0 – 246 psig @ 77 °F (0 – 17 barg @ 25 °C 0 – 7 barg @ 95 °C) |
| Electrode Material | Titanium |
| Primary Media/Application | Chemical Processes Other Industrial Processes Other Water Processes Wastewater |
| Hygienic/Biocompatibility Approvals | No |
| Mechanical Pressure Resistance (Bar) | 17 bar (25 °C), 7 bar (95 °C) |
| Sensor Material | Ti Grade 2 / PVDF |
| Cell Constant (accuracy) | ± 1.0 % |
| Measurement Range | 0.02-10000 µS/cm |
VITON is a registered trademark of E. I. Du Pont de Nemours and Company Corporation
Description
The sensor can easily be installed in a customer-supplied pipe-tee via the 3/4" NPT thread. The electrodes made of titanium allow to use this sensor in a wide range of applications exceeding strictly water purifing processes.Features and Benefits
| Wide measuring range |
|
| |
| Increased process reliability |
|
| |
| Easy to install |
|
